- Actuators
- Adapters
- Air Blowers
- Air Conditioners
- Air Curtains
- Air Purifiers
- Anemometers
- Axial fans
- Ball Valves
- Belimo
- Blowers
- Brackets
- Brass
- Brazing Rods
- Capacitors
- Carrier Parts
- Clamp Meters
- Cleaning Products
- Coatings
- Compressors
- Condensate Pumps
- Connectors
- Contactors
- Copper Capillary
- Copper Coils
- Copper Straight Tubes
- Copper Strainers
RTM HT-1S660 Hand Torch With Hose
- HVAC / Plumbing
- Automotive
- Disassemble Bolt
- DIY
The RTM-HT-1S660 is a professional-grade, self-lighting hand torch designed for HVAC/R brazing and welding.
It features a 1.5-meter hose, 360-degree rotation, and compatibility with MAPP / Propane gases.
The RTM-HT-1S660 provides a turbo-swirl flame capable of reaching temperatures up to 2200°C for efficient soldering and welding.
We offer an extensive selection of welding and brazing solutions. Please contact our team for expert guidance on finding the right tool for your project.
Operating The Air/Fuel Torch:
1. The maximum heat zone is very concentrated. It's located between 15mm to 20mm from the end of the tip. Holding the torch too close or too far from the target will reduce the heating effect.
2. Temperature Control: To reduce the heating effect of the air/ fuel torch, several approaches are recommended:
a. Move the farther away from the target.
b. Use propane fuel instead of MAP/Pro fuel.
c. Use smaller or soldering tips-if not included in your kit, smaller or soldering tips are available as an option.
