Sauermann Si-30 Piston Pump

Features of Si-30 Condensate Pump

  • The high performance Si-30 is suitable for air-conditioning units up to 20 kW.
  • The piston technology is specifically designed for removing condensates from air conditioning systems.
  • The Si-30 is fully reliable, in any kind of environment.
  • Its operating sound level will remain silent whatever the volume of condensates

Technical Specification

Max. flow rate 20 l/h
Max. suction head 3m
Max discharge head 10m (flow rate= 4l/h)
Max. pressure 14 m (flow rate = 0 l/h)
Sound level at 1m
According to EN ISO 3744(Measured at LNE lab, pump operating with water, out of application)
20 dBa
Mains supply 230 V~ 50 Hz – 14 W
Insulation class Double insulation
Detection levels ON: 16 mm; OFF: 11 mm; Safety: 19 mm
Safety switch NC 8 A resistive – 250 V
Thermal protection (overheating) 115 °C (auto-reset)
Max. condensate temperature 35 °C
Operating conditions 100% - Continuous duty
Protection IP20
Safety standards CE & EAC
RoHS directive Compliant
WEEE directive Compliant

Patented technology

  • Increased performance: Only one pump, for air conditioning unit up to 20 kW.
  • High resistance to pollution created by general environment. Capable of discharging small particles.
  • Proven Reliability.
  • The Drain Safe Device retains prime and prolongs the pump life.

Energy saving

  • Improved performance and high flow rate reduce operation time and energy consumption.

Silent

  • Quiet in operation: 20 dBA independently tested.
  • The size of the air-conditioning unit and volume of condensates to be removed does not affect the operational sound level of the pump.
  • Mounting bracket specifically designed to reduce vibration transmission to the wall / panel or pipework.

Easy to install

  • Compact design
  • Mounting bracket: allows the pump to be wall mounted or hung from ceilings and pipework.
  • Lockable plug-in power cord to avoid unintended disconnection.

Applications

  For use with any air-conditioning units, up to 20 kW:

  • Wall mounted
  • Ceiling suspended
  • Ducted
  • Fan-coils
   

Sauermann Si-82 Centrifugal Pumps

Made in France

Features

  • The Si-82 pump is designed to be easily installed whatever the layout of the premises.
  • Strong, the Si-82 tolerates charged, high temperature and acidic condensates (pH>2.5) produced by gas condensing boilers.
  • Capable of evacuating up to 500 l/h, the Si-82 pump is suitable for air conditioning units and industrial refrigeration displays.

Technical Specification

Max. flow rate 500 l/h
Max. discharge head 5m
Max pressure 5.4 m - flow rate = 0 l/h
Sound level in application at 1 m (3.3 ft) (Measured in Sauermann acoustic lab, pump operating with water) ≤ 45 dBA
Mains supply 230 V~ 50 Hz – 70 W – 0.75 A
Detection levels On: 53 mm, Off: 42 mm, Safety: 64 mm
Safety switch NC 4 A resistive – 250 V
Max. condensate temperature 65 °C, 80 °C in short peak
Max. condensate acidity pH > 2.5 (Gas condensing boilers)
Thermal protection (overheating) 105 °C (auto-reset)
Operating conditions 30%: 3s ON – 7s OFF
Protection IP20
Safety standards CE and EAC
RoHS directive Compliant
WEEE directive Compliant
Weight (including box) 2.5kg
Packaging 4 pcs: L 400 x W 300 x H 200 mm
Pallet quantity 64 pieces

High Performance

  • Can discharge condensates up to 5 m
  • Up to 500 l/h, for shorter running time
  • Low sound level – quiet operation

Easy hydraulic connection

  • Quarter turn easily removable check valve, designed to facilitate Ø int. 10 mm (3/8”) hose plug in.
  • 4 inlet holes Ø 30 mm (1” 3/16)

Easy electrical connection

  • Plug-in power cord to facilitate installation and maintenance.

Applications

  • Column air conditioning units
  • Multi cassettes
  • Ducted units
  • Gas condensing boilers
  • High efficiency gas furnace
  • Refrigerating display cabinets
  • Evaporators

Versatile

  • Easily removable tank and reversible pump, to allow mounting rather on the left or on the right of the application and choosing the side of the water exit.

Installation in any place

  • Pump can be floor mounted, attached on a wall or hanging from a ceiling.

High resistance

  • Oil and acid resistant float
  • Mechanical structure resistant to shocks

WIPCOOL P12 Slim Condensate Pump

Main Features
  • Slimmest body design, flexible installation.
  • Built-in safety switch, avoid the overflow when drainage failure
  • Unique motor balance technology, reduce vibration.

Product Features

The P12 condensate pump adopts a slim body design and is WIPCOOL's slimmest mini pump. Specially designed for narrow spaces, it is mainly installed in the back interior of split air conditioners. It can also be applied in ducted air conditioners and cassette air conditioners. It is suitable for devices with a cooling capacity under 30,000 BTU/hr.

With a built-in safety switch and unique motor balance technology, the pump operates silently for extended periods and guarantees safe drainage.

Model P12
Voltage 100V-230V~/ 50-60Hz
Suction Lift(Max.) 2m (6.5ft)
Discharge Head(Max.) 7m (23ft)  
Flow Rate(Max.) 12L/h (3.2GPH)
Tank Capacity 35 ml
Mini Splits up to   30,000btu/hr
Sound Level at 1m 19dB(A)
Ambient Temp. 0ºC~50ºC

Why Choose WIPCOOL Supermarket Condensate Pump

  • Compact and Powerful
  • Quite and Reliable
  • Innovation driven
  • Easy Maintenance

Mini Pump Series

WIPCOOL offers the most complete and high-performance range of mini pumps worldwide. They are widely applied in split, ducted-type, and cassette-type air conditioning units, as well as other appliances that produce small amounts of condensate.

Some items are equipped with a brushless motor, safety switch, and probe sensor, which maintain the pump's high performance and ensure silent, durable operation with a long service life.

Mini Pump Series Selection Guide

Model Max. unit output Applicable A/C Applicable place discharge head(max.)
P20 30,000Btu/h Split unit, Floor mounted unit. Smaller commercial and domestic units in quite environments. 10m
P38 45,000Btu/h  
P18 30,000Btu/h  
P36 45,000Btu/h  
P16 30,000Btu/h   Ducted units; Floor standing & Chassis units; High wall split systems  
P32 45,000Btu/h  
P12 30,000Btu/h   7m
P12C 30,000Btu/h  

WIPCOOL P32 Mini Split Condensate Pumps

Main Features
  • Silent Running, Reliable and Durable
  • Super quiet design, Unequalled operating sound level
  • Built-in safety switch, improve reliability
  • Exquisite&compact design, Suitable for different spaces
  • Built-in LEDs provide visual operating feedback

Product Description

  The P16/32 mini split condensate pump is most popular in WIPCOOL mini pumps. Widely used in ducted air conditioner, suitable for device which cooling capacity under 45,000btu/hr.

Adopting a brush-less motor and built-in safety switch, ensuring that the pump can operate silently for a long time and guarantee the safety drainage.
Model

P16

P32

Voltage

100v-230V~/50-60Hz

Suction Lift(Max.)

2m (6.5ft)

Discharge Head(Max.)

10m[33ft]

Flow Rate(Max.)

16L/h(4.2GPH)

32L/h(8.5GPH)

Tank Capacity

35 ml

Mini Splits up to  

30,000btu/hr

45,000btu/hr

Sound Level at 1m

19dB(A)

21dB(A)

Ambient Temp.

0℃-50℃

condensate pump suppliers in uae

Mini Pump Series

WIPCOOL offers the most complete and high-performance range of mini pumps worldwide. They are widely applied in split, ducted-type, and cassette-type air conditioning units, as well as other appliances that produce small amounts of condensate.

Some items are equipped with a brushless motor, safety switch, and probe sensor, which maintain the pump's high performance and ensure silent, durable operation with a long service life.

Mini Pump Series Selection Guide

Model Max. unit output Applicable A/C Applicable place discharge head(max.)
P20 30,000Btu/h Split unit, Floor mounted unit. Smaller commercial and domestic units in quite environments. 10m
P38 45,000Btu/h  
P18 30,000Btu/h  
P36 45,000Btu/h  
P16 30,000Btu/h   Ducted units; Floor standing & Chassis units; High wall split systems  
P32 45,000Btu/h  
P12 30,000Btu/h   7m
P12C 30,000Btu/h  

WIPCOOL P120S Economic Supermarket Condensate Pump

Main Features
  • Made of stainless steel case with 3L large reservoir
  • Ideal for cold produce display cabinets in supermarkets and convenience stores.
  • Low profile (69mm height) for extremely easy to install and maintenance.
  • Built of heat resistant material, suitable for handling 70ºC high temperature water.
 

Product Features

The P120S is specially designed to handle condensate from supermarket refrigerated display cabinets. It is extremely easy to install and maintain.

The compact design of the pump facilitates installation under low-slung display cabinets and removes water during the defrost cycle.

Including an easy-to-clean stainless steel tank that can handle hot water up to 70ºC, a non-return valve, and two optional inlets (top or side). It effectively pumps away defrost water and debris.

Model 120S
Voltage 230V~/50-60Hz or 100-120V~/50-60Hz
Discharge Head(Max.) 30m(98ft )  
Flow Rate(Max.) 120L/h (32GPH)
Tank Capacity 3L
Sound Level at1m 40-62dB(A)
Water Temp. Max 75ºC
Power 30W

Why Choose WIPCOOL Supermarket Condensate Pump

  • Easy Maintenance
  • Time saving
  • High performance
  • Industry leading

Supermarket Condensate Pump Selection Guide

Supermarket Condensate Pump

WIPCOOL supermarket condensate pump features a compact design, ideal for cold produce display cabinets in supermarkets and convenience stores. It is especially suitable for handling condensate from supermarket refrigerated display cabinets.

It is extremely easy to install and maintain. The built-in high-level safety switch can either enable the system to be switched off or sound an alarm in the event of pump failure.

Model Max. unit output Applicable Applicable place discharge head(max.)
P120S 300,000Bt/h Single and multiple refrigeration units; Cold store cabinets. Cold Stores, Super Markets 30m
P360S 500,000Bt/h   36m

WIPCOOL P180 General Tank Pump

Main Features
  • Floatless structure, free maintenance for long time working.
  • Automatic reset thermal protection, prolong service life.
  • Forced air cooling motor, ensure stable running.
  • Anti-backflow design, improve the safety drainage.

The general tank pump P180 can meet the condensate drainage needs of most air conditioning and refrigeration equipment, covering discharge lifts under 5 to 6 meters. It is suitable for devices with a cooling capacity under 400,000 BTU/hr.

Adopting a dirt-resistant centrifugal high-power water pump with a built-in safety switch and probe level sensor ensures reliable long-term operation.

Model P180
Voltage 230V or 100-120V
Discharge Head(Max.) 5m(17ft)@50Hz     6m(20ft)@60Hz  
Flow Rate(Max.) 280L/h (74GPH)     350L/h (93GPH)
Tank Capacity 1.8L
Sound Level at 1m   48dB(A)
Ambient Temp. 0ºC~50ºC
Power Consumption 60W

Why Choose WIPCOOL Tank Pump?

  • Easy Installation
  • Durable Running
  • High Performance
  • Industry Leading

Tank Pump Series

WIPCOOL focuses on innovation and has created a market-leading range of tank pumps, covering 5 lift levels and flow rates: [10m, 40L/h], [3.5m, 110L/h], [4.5m, 180L/h], [6.8m, 380L/h], [12m, 580L/h], designed to suit a diverse array of applications.

Easy to install and maintain, with features including an easy-clean tank, plug-and-play functionality, a twist-and-click non-return valve, and a built-in spirit level. With reliability as the key decision criterion, the tank pumps are designed to perform even under the most challenging applications.

Tank Pump Series Selection Guide

Model Max. unit output Applicable A/C Applicable place discharge head(max.)
P40 45,000Bt/h Split unit;
Cassette unit;
Ducted unit;
Floor mounted unit
Commercial and domestic units in quiet environments 10m
P110 150,000Bt/h   3.5m
P180 400,000Bt/h  

Floor mounted unit;
Dehumidifiers;
Ice makers;
Air handling units(AHUs)

Large commercial units   5m@50Hz
6m@60Hz
P380 500,000Bt/h   6.8m
P580 500,000Bt/h   12m
wipcool tank pump suppliers in uae

WIPCOOL P380 Low profile Tank Pump

Main Features

  • Buckle type fixed structure, simple installation.
  • 5 inlets for optional (4 top & 1 side), easy to use.
  • Low profile design, good fit for those instances where space is at a premium.

The P380 tank pump provides the most economical solution for drainage demands with a lift within 7 meters and a flow rate within 400L/h. It is suitable for devices with a cooling capacity under 500,000 BTU/hr.

Adopting a high-performance water pump with a built-in safety switch and probe level sensor ensures reliable long-term operation. Additionally, this pump is only 119mm in height, making it an excellent fit for instances where space is at a premium

Model P380
Voltage 100V-230V~/50-60Hz
Discharge Head(Max.) 6.8m(22ft)  
Flow Rate(Max.)

380L/h (100GPH)     

Tank Capacity 1.8L
Sound Level at 1m   28dB(A)
Ambient Temp. 0ºC~50ºC
Power Consumption 20W
P380 low profile tank pump in uae

Why Choose WIPCOOL Tank Pump?

  • Easy Installation
  • Durable Running
  • High Performance
  • Industry Leading

Tank Pump Series

WIPCOOL focuses on innovation and has created a market-leading range of tank pumps, covering 5 lift levels and flow rates: [10m, 40L/h], [3.5m, 110L/h], [4.5m, 180L/h], [6.8m, 380L/h], [12m, 580L/h], designed to suit a diverse array of applications.

Easy to install and maintain, with features including an easy-clean tank, plug-and-play functionality, a twist-and-click non-return valve, and a built-in spirit level. With reliability as the key decision criterion, the tank pumps are designed to perform even under the most challenging applications.

Tank Pump Series Selection Guide

Model Max. unit output Applicable A/C Applicable place discharge head(max.)
P40 45,000Bt/h Split unit;
Cassette unit;
Ducted unit;
Floor mounted unit
Commercial and domestic units in quiet environments 10m
P110 150,000Bt/h   3.5m
P180 400,000Bt/h   Floor mounted unit;
Dehumidifiers;
Ice makers;
Air handling units(AHUs)
 
Large commercial units   5m@50Hz
6m@60Hz
P380 500,000Bt/h   6.8m
P580 500,000Bt/h   12m
wipcool tank pump suppliers in uae

WIPCOOL P580 Super Performance Tank Pump

Main Features

  • Super performance(12m lift head, 580L/h flow rate)
  • Forced air cooling brushless motor, ensure stable running.
  • Anti-backflow design, guarantee the safety drainage
  • Dual sensor control system, improve durability.

The P580 tank pump provides the most economical solution for extreme drainage conditions, with a lift height of 12 meters and a flow rate of 600L/h. It is suitable for devices with a cooling capacity under 500,000 BTU/hr.

Adopting a brushless motor, dirt-resistant high-power centrifugal water pump, built-in safety switch, and dual control level sensor (probe and float) ensures that the product can operate reliably for a long time and safely discharge condensate.

p580 tank pump supplier in dubai
Model P580
Voltage 230V~/50-60Hz or 100-120V~/50-60Hz
Discharge Head(Max.) 12m(40ft)  
Flow Rate(Max.) 580L/h (153GPH)
Tank Capacity 1.8L
Sound Level at 1m   60dB(A)
Ambient Temp. 0ºC~50ºC
Power Consumption 85W

Why Choose WIPCOOL Tank Pump?

  • Easy Installation
  • Durable Running
  • High Performance
  • Industry Leading

Tank Pump Series

WIPCOOL focuses on innovation and has created a market-leading range of tank pumps, covering 5 lift levels and flow rates: [10m, 40L/h], [3.5m, 110L/h], [4.5m, 180L/h], [6.8m, 380L/h], [12m, 580L/h], designed to suit a diverse array of applications.

Easy to install and maintain, with features including an easy-clean tank, plug-and-play functionality, a twist-and-click non-return valve, and a built-in spirit level. With reliability as the key decision criterion, the tank pumps are designed to perform even under the most challenging applications.

Tank Pump Series Selection Guide

Model Max. unit output Applicable A/C Applicable place discharge head(max.)
P40 45,000Bt/h Split unit;
Cassette unit;
Ducted unit;
Floor mounted unit
Commercial and domestic units in quiet environments 10m
P110 150,000Bt/h   3.5m
P180 400,000Bt/h   Floor mounted unit;
Dehumidifiers;
Ice makers;
Air handling units(AHUs)
 
Large commercial units   5m@50Hz
6m@60Hz
P380 500,000Bt/h   6.8m
P580 500,000Bt/h   12m
wipcool tank pump suppliers in uae