UNI-T UT219P AC Harmonics Digital Power Clamp Meter

Features include 75mm Jaw Opening, 1000A AC Current, Three-Phase Power Measurement, 32nd-Order Harmonic Analysis, Total Harmonic Distortion, Power Factor and Bluetooth Data Logging

The UNI-T UT219P is a heavy-duty, industrial-grade Power Meter and clamp analyzer engineered for comprehensive grid analysis, renewable energy tracking, and advanced HVAC troubleshooting. Built to withstand volatile environments with CAT IV 600V safety compliance and an IP54 weatherproof rating, this multi-functional instrument acts as a high-precision Digital Ammeter to deliver highly accurate True RMS current measurements up to 1000A AC and 1000V AC.

It serves as a comprehensive portable energy diagnostic suite capable of measuring single and three-phase active power up to 3000kW, mapping complex power quality metrics, and pinpointing electrical system degradation up to the 32nd harmonic order. Featuring a massive 75mm jaw designed to enclose thick distribution cables and integrated Bluetooth 5.0 data logging for remote tracking via smart devices, this premium Digital Ammeter and Power Meter gives electrical engineers the power to troubleshoot safely, efficiently, and with absolute precision.

Measurement Specifications

  • Harmonics & Distortion Analysis:

    High-resolution tracking of Total Harmonic Distortion (THD) and isolated individual harmonic components up to the 32nd order.

  • AC Current:

    Heavy-duty tracking up to 1000A AC with an accuracy profile of ±(1.5% + 3).

  • AC Voltage:

    True high-voltage threshold coverage up to 1000V AC with an accuracy profile of ±(0.7% + 3).

  • Active Power (Single-Phase):

    Direct structural power tracking up to 1000kW.

  • Active Power (Three-Phase networks):

    Engineered for full phase matrices, evaluating up to 1732kW (3-Phase 4-Wire) and 3000kW (3-Phase 3-Wire) distribution systems.

  • Power Frequency Bandwidth:

    High-fidelity measurement frequency spectrum from 15Hz to 1000Hz.

  • Power Quality Angles:

    Comprehensive phase angle structural mapping between -180° and 179.9°.

  • Power Factor Tracking:

    Direct power efficiency evaluation scaling from -1 to 1.

  • Peak Value Capturing:

    Built-in hardware logging to catch fast AC/DC PEAK voltage and current surges.

  • Unbalanced Volts & Sequence Routing:

    Built-in diagnostic tracking for 3-phase unbalanced voltage parameters and Phase Sequence Detection operating from 80V to 1000V.

Core Device Features

Optimized for complex electrical analysis and predictive grid maintenance, the hardware functions as a complete portable energy management toolkit:

  • 01

    True RMS Sensing

    Prevents measurement degradation on modern non-linear loads, keeping your calculations highly accurate amidst high harmonic pollution.

  • 02

    32-Order Harmonics Analysis

    Measures total harmonic distortion (THD) and maps individual distortion levels up to the 32nd order.

  • 03

    4-in-1 Quad-Readout Display

    The 9999-count LCD presents 4 different real-time electrical results simultaneously (e.g., kW, Current, Voltage, and Frequency) to eliminate tedious screen-cycling.

  • 04

    AC/DC Peak Catching Mode

    Instantly grabs fast, transient crest voltages and surge fluctuations.

  • 05

    Phase Sequence Detection

    Integrated phase sequence rotation tests (Positive / Negative directional states) operating between 80V and 1000V AC.

General & Mechanical Characteristics

  • Massive 75mm Jaw Architecture:

    Featuring a unique triangular jaw layout, the spacious 75mm clamp diameter effortlessly surrounds ultra-thick industrial power cables and heavy-gauge multi-wire bundles.

  • IP54 Environmental Barrier:

    Enclosed in a heavily sealed chassis designed to block the ingress of workspace dust, grit, and splashed moisture.

  • Smart Bluetooth 5.0 Wireless Pipeline:

    Integrates a built-in Bluetooth chip that communicates directly with mobile devices and tablets, allowing off-site tracking, remote data tracking, and instantaneous generation of formal testing reports.

  • Safety Isolation Class:

    Certified to the highest parameters for electrical infrastructure environments: CAT III 1000V and CAT IV 600V.

  • Safety Compliance:

    Fully accredited with international testing benchmarks including CE, UKCA, and cETLus marks.

Advantages Over Nearest Competitors

  • True Dual-Instrument Integration: Most industrial clamp meters stop at simple current and voltage detection. The UT219P bridges the gap by functioning as a high-amperage clamp and a complex 3-phase harmonic power analyzer in a single handheld chassis.
  • Unrivaled 75mm Jaw Accessibility: Standard industrial clamps restrict technicians with tighter 33mm to 45mm openings. The ultra-wide 75mm jaw allows engineers to clamp safely around high-capacity electrical distribution cabinets and thick industrial main entry feeds without splitting wires.
  • Wireless Data & Safe Distance Logging: By employing Bluetooth 5.0 reporting, troubleshooting teams can seal live breaker panels back up, move away from volatile arc-flash zones, and track real-time 3-phase line variations from a completely safe, remote distance via tablet or phone.