UNI-T UT219PV Professional High-Voltage AC/DC Solar Clamp Meter

The UT219PV is an advanced AC/DC clamp meter specially designed for high-voltage photovoltaic environments. It offers exceptional accuracy and performance, with a wide range of features.

With its automatic range selection and a clear display capable of showing up to 9999 digits, this clamp meter allows for precise measurements of AC/DC voltage, current, low-pass filtered voltage/current, surge current, peak current, DC power (using an external flexible clamp head), resistance, circuit continuity, diodes, capacitance, and temperature.

It’s versatility extends beyond photovoltaic applications, as it can also be used in other high-voltage settings like energy storage systems, uninterruptible power supplies (UPS), and large motors.

Built for harsh environments, the UNI-T UT219PV features a CAT III 1500V / CAT IV 600V safety rating and heavy-duty, IP65-rated dust and water protection.

Measurement Specifications

01
High-Voltage DC Thresholds:
Tracks massive solar arrays up to 2500V DC (and 999.9mV DC) with a base accuracy of ±(1.0% + 5).
02
High-Voltage AC Thresholds:
Standard system verification up to 1500V AC with a base accuracy of ±(1.0% + 5).
03
AC/DC Current Handling:
Embedded hardware architecture captures up to 1000A AC/DC natively through the jaw mechanical interface.
04
DC Power (Kilovolt-Amperes):
Delivers structural power tracking up to 999.9 kVA / 2500 kVA with a ±(2.0% + 20) accuracy profile.
05
Low Pass Filter (LPF) Testing:
Strips out unwanted high-frequency noise distortions with dedicated LPF parameters evaluating up to 999.9V AC and 999.9A AC.
06
Flexible Sensor Current Expansion:
Supports optional plug-and-play flex sensor inputs expanding alternative AC diagnostic thresholds up to 3000A.
07
Passive Circuit Support:
Comprehensive troubleshooting metrics for Resistance (up to 99.99kΩ), Capacitance (up to 1000μF), and Frequency parameters ranging from 5.0Hz to 999.9Hz.
08
Thermal Scope Tracking:
Built-in core probe analysis mapping ambient environments or components from -40°C to 400°C (-40°F to 752°F).

Core Device Features

  • 01

    True RMS Waveform Processing

    Eradicates calculation skewing on distorted signals, preserving definitive electrical readings despite inverter harmonic layers.

  • 02

    Dual Value (V+A) Display LCD

    Advanced high-count 9999 display features side-by-side readouts to show real-time voltage and current metrics concurrently.

  • 03

    Automated Solar Polarity Safety Alarms

    Instantly activates an audible buzzer and flashing visual indicator if a technician hooks up reversed probes below -10V DC.

  • 04

    Transient Capture Toolkit

    Equipped with automated data hold options alongside specialized Inrush current monitoring and ultra-fast Peak hold capturing.

General & Mechanical Characteristics

  • 35mm Ultra-Thin Structural Jaws:

    Custom-sculpted jaw mechanics measure only 35mm wide, expressly optimized to slot effortlessly into narrow combiner boxes or overcrowded commercial solar inverters.

  • IP65 Weatherproof Enclosure:

    Sealed explicitly to ward off driving rain, water spray, and microscopic job site dust contamination.

  • Integrated Bluetooth 5.0 Datastream:

    Interfaces natively with smart devices running the UNI-T Smart Measure ecosystem, unlocking off-site tracking, remote data tracking, and seamless field generation of formal validation testing reports.

  • Battery Power Management:

    Features automated display backlighting and low-battery tracking powered via two accessible, ubiquitous standard AA batteries

Advantages Over Nearest Competitors

  • Engineered specifically for Solar Infrastructure: While typical heavy-duty industrial clamps plateau at 1000V DC thresholds, the UT219PV safely extends tracking metrics up to 2500V DC to securely audit modern utility-scale solar farms and microgrid arrays.
  • Ultra-Thin Inverter Jaw Integration: Standard high-current clamp meters feature wide, bulbous profiles that struggle in tight electrical cabinets. The ultra-slender 35mm jaw ensures technicians can map targeted conduits cleanly without risking accidental short-circuits across neighboring wire links.
  • Proactive Reverse Polarity Alarms: Avoid expensive component damage or explosive arcs. If panels are improperly wired during construction, the built-in auditory and visual warning profile instantly flags errors before testing proceeds further.