- Actuators
- Adapters
- Air Blowers
- Air Conditioners
- Air Curtains
- Air Purifiers
- Anemometers
- Axial fans
- Ball Valves
- Belimo
- Blowers
- Brackets
- Brass
- Brazing Rods
- Capacitors
- Carrier Parts
- Clamp Meters
- Cleaning Products
- Coatings
- Compressors
- Condensate Pumps
- Connectors
- Contactors
- Copper Capillary
- Copper Coils
- Copper Straight Tubes
- Copper Strainers
Hidria 560mm, 230V 1Ph Axial Fan
Made in Slovenia, Europe
The Hidria R13R-5625A-6M-X093 (ordering code 0313-4-0415) is a low-noise, single-phase AC axial fan. Featuring a 560 mm nominal impeller diameter, it is highly utilized in commercial refrigeration heat exchangers, condenser systems, ventilation units, and heat pumps that require steady air volume at reduced speeds.
- Fan Diameter: 560 mm
- Model Number :R13R-5625A-6M-X093 (ordering code 0313-4-0415)
Model Code Breakdown
- R13: Product series identifier for the external rotor AC motor.
- R: Motor variant designation with an integrated wire guard/grill framework.
- 56: 560 mm nominal blade/impeller diameter.
- 25: 25-degree blade pitch angle (engineered for optimized balance between acoustic level and volumetric airflow).
- A: Sucking / Suction airflow direction (pulls air through the impeller blades and over the motor framework).
- 6M: 6-pole, single-phase (Mains 230V) external rotor AC induction motor (6 poles provide a lower operating speed for quieter operation).
Electrical & Operational Performance
The verified electrical data under the EN 60335 standard for the fan's operation at a 50 Hz frequency includes:
|
Parameter |
Specification Value @ 50 Hz |
|
Nominal Voltage |
230 V AC (Single-Phase, ±10%) |
|
Frequency |
50 Hz |
|
Rated Power Input |
330 W |
|
Rated Current Draw |
1.5 A |
|
Nominal/Rated Speed |
 845 RPM |
|
Maximum Free-Air Flow |
~4,468 m³/h |
|
Static Efficiency |
31.0% to 32.7% (Static Pressure Drop up to 73–76 Pa) |
|
A-Weighted Sound Power Level |
73 dB(A) |
Mechanical & Environmental Specs
- Housing Design Type: Fan supplied natively with a pre-mounted protective guard grill structure.
- Total Unit Weight: 16.0 Kg.
- Ingress Protection: IP54 rating (fully protected against harmful dust ingress and splashing water or condensation, suitable for demanding outdoor placement).
- Insulation Class: Class 155 (F) with integrated thermal overload safety cutouts.
- Ambient Operating Range: -30 °C to +70 °C (Permits use in low-temperature cold rooms or high-heat rooftop condensing units).
- Bearing Mechanics: Maintenance-free, heavy-duty sealed ball bearings designed for an operating life of 30,000 to 40,000 hours.
