RTM HT-1S Hand Torch
RTM HT-1S Hand Torch
Back to products
Water Solenoid Valve 3/4" 220V, DCF-SS-20-AC220
Water Solenoid Valve 3/4" 220V, DCF-SS-20-AC220
RTM HT-1S660 Hand Torch With Hose - Image 1
RTM HT-1S660 Hand Torch With Hose - Image 2
RTM HT-1S660 Hand Torch With Hose - Image 3
RTM HT-1S660 Hand Torch With Hose - Image 4
RTM HT-1S660 Hand Torch With Hose - Image 5
RTM HT-1S660 Hand Torch With Hose - Image 6
Click to enlarge
RTM HT-1S660 Hand Torch With Hose
RTM HT-1S660 Hand Torch With Hose - Image 2
RTM HT-1S660 Hand Torch With Hose - Image 3
RTM HT-1S660 Hand Torch With Hose - Image 4
RTM HT-1S660 Hand Torch With Hose - Image 5
RTM HT-1S660 Hand Torch With Hose - Image 6
RTM

RTM HT-1S660 Hand Torch With Hose

  • HVAC / Plumbing
  • Automotive
  • Disassemble Bolt
  • DIY

Operating The Air/Fuel Torch:


1. The maximum heat zone is very concentrated. It's located between 15mm to 20mm from the end of the tip. Holding the torch too close or too far from the target will reduce the heating effect.


2. Temperature Control: To reduce the heating effect of the air/ fuel torch, several approaches are recommended:


a. Move the farther away from the target.
b. Use propane fuel instead of MAP/Pro fuel.
c. Use smaller or soldering tips-if not included in your kit, smaller or soldering tips are available as an option.