- Actuators
- Adapters
- Air Blowers
- Air Conditioners
- Air Curtains
- Air Purifiers
- Anemometers
- Axial fans
- Ball Valves
- Belimo
- Blowers
- Brackets
- Brass
- Brazing Rods
- Capacitors
- Carrier Parts
- Clamp Meters
- Cleaning Products
- Coatings
- Compressors
- Condensate Pumps
- Connectors
- Contactors
- Copper Capillary
- Copper Coils
- Copper Straight Tubes
- Copper Strainers
WIPCOOL 2F2BRK Cordless Vacuum Pump 5CFM
Dual Power Allows Easy Switch
- Never suffer from low battery anxiety
- Freely switch between AC power and battery power. Yes, the 2F2BRK allows you to easily switch between battery power and AC power.
- Avoid downtime on the job site
- Work in sites where AC power is not available
Product Description
The WIPCOOL F Series of dual power vacuum pumps are based on cordless vacuum pumps and can be easily switched between 18V Li-ion batteries and 220V AC power. The WIPCOOL 2F2BRK can enable up to 45-60 minutes of operation time when using a 18V/4.0Ah capacity Li-ion battery, solving the problem of finding AC power supply for outdoor work. If AC power is relatively easy to obtain, it can provide long-term operation to avoid the anxiety of Li-ion battery depletion in a short time.
The WIPCOOL 2F2BRK is rated at 5 CFM. The 2F2BRK is compatible with the new generation A2L refrigerants as well as backward compatible with older refrigerants like R22, R134a, R404a, R410a, etc.
The WIPCOOL 2F2BRK is equipped with a built-in solenoid valve and overhead vacuum meter as standard. In addition, the 2F2BRK is built with a reinforced aluminum alloy oil tank, has effective heat dissipation and is resistant to chemical corrosion. The oil color and oil level are easy to see with the oversized sight glass.
The WIPCOOL 2F2BRK comes with a Makita battery adaptor. You can use any Makita battery on the 2F2BRK easily and safely.
The WIPCOOL F Series of dual power vacuum pumps are based on cordless vacuum pumps and can be easily switched between 18V Li-ion batteries and 220V AC power. The WIPCOOL 2F2BRK can enable up to 45-60 minutes of operation time when using a 18V/4.0Ah capacity Li-ion battery, solving the problem of finding AC power supply for outdoor work. If AC power is relatively easy to obtain, it can provide long-term operation to avoid the anxiety of Li-ion battery depletion in a short time.
The WIPCOOL 2F2BRK is rated at 5 CFM. The 2F2BRK is compatible with the new generation A2L refrigerants as well as backward compatible with older refrigerants like R22, R134a, R404a, R410a, etc.
The WIPCOOL 2F2BRK is equipped with a built-in solenoid valve and overhead vacuum meter as standard. In addition, the 2F2BRK is built with a reinforced aluminum alloy oil tank, has effective heat dissipation and is resistant to chemical corrosion. The oil color and oil level are easy to see with the oversized sight glass.
The WIPCOOL 2F2BRK comes with a Makita battery adaptor. You can use any Makita battery on the 2F2BRK easily and safely.
Read More About The WIPCOOL 2F2BRK VACUUM PUMPS
Wipcool 2F2BRK vacuum pump
| Model | 2F2BRK |
| Battery | DC18V 9.6AH |
| AC Voltage | 230V~/50Hz |
| Ultimate Vacuum | 15 Microns |
| Input Power | 1/2HP |
| Flow Rate (Max.) | 5CFM, 142L/min |
| Oil Capacity | 450ml |
|
Weight |
5.5kg |
|
Dimension |
500 x 315 x 255 mm |
| Battery Run Time | Approximately 60 minutes depending on job conditions and other variables. |
