Heat Reflector Guard for Welding & Soldering Blowtorches
Heat Reflector Guard for Welding & Soldering Blowtorches
Back to products
Carrier ducted split ac
Carrier wall mounted Split42QHA018VS/38QHA018VS
Johnson Controls 1" VLC2200HC-C 2-Way Zone Valve - Image 1
Johnson Controls 1" VLC2200HC-C 2-Way Zone Valve - Image 2
Click to enlarge
Johnson Controls 1" VLC2200HC-C 2-Way Zone Valve
Johnson Controls 1" VLC2200HC-C 2-Way Zone Valve - Image 2
Johnson Controls

Johnson Controls 1″ VLC2200HC-C 2-Way Zone Valve

  • DN250 (1″)
  • 220V


The VLC2000 Series is designed to control water flow according to signals received from the controller. This maintains the room temperature by adjusting water flow through the fan coil unit.

The VLC2000 Series features a spring return function, and are available in DN15/20/25 valve sizes. The valve and actuator can be easily assembled on the field without accessories and commissioning.

The specific technical specifications for the Johnson Controls VLC2200HC-C 1" (DN25) 2-Way Electric Zone Valve are detailed below:

Sizing and Physical Dimensions

    • Model: VLC2200HC-C
    • Valve Size: DN25 (1 inch)
    • Configuration Type: 2-way straight-through flow
    • Flow Coefficients: Kv 3.0 / Cv 3.5
    • Close-Off Pressure: 0.20 MPa (30 PSI)
    • Total Weight: 1000 grams
    • Dimensions (mm): A = 95.5, B = 112, C = 103

Electrical Specifications

  • Power Supply Required: 220VAC ±10%, at 50/60Hz
  • Rated Power Consumption: ≤ 7VA
  • Control Mechanism: Standard ON/OFF signal

Operational Performance

    • Actuation / Action Style: Spring return mechanism, Normally Closed (N.C.)
    • Opening Cycle Time: Under 18 seconds
    • Closing Cycle Time: Under 8 seconds

Material and Fluid Ratings

  • Valve Body: Forged Brass
  • Internal Sealing: EPDM rubber
  • Acceptable Media: Cooling or heating water
  • End Connections: ISO 7/1 threaded connections
  • Fluid Temperature Operating Range: 0°C to 94°C
  • Nominal Static Pressure Rating: PN20 (Working pressure up to 300 PSI / 2.0 MPa)

Essential Installation Note

This series is strictly recommended for closed system applications.

In hydronic HVAC and mechanical piping, a closed system (or closed-loop system) is a sealed network where the circulating fluid is completely isolated from the outside atmosphere.

Because the water or fluid continuously recirculates without exposing itself to ambient air, virtually no evaporation occurs, and the system retains its original fluid charge for months or years.

Why Closed Systems Matter for Valves (Like the VLC2200HC-C)

As noted in the manufacturer documentation, the Johnson Controls VLC2000 series zone valves are engineered specifically for closed loops.

  • The Danger of Open Systems: Open systems (like open-circuit cooling towers or decorative fountains) continuously draw in fresh air and makeup water. This introduces high levels of dissolved oxygen and chlorine, which rapidly oxidize and erode brass valve components, causing premature seal and body failure.
  • The Closed System Advantage: Once the initial water fill is purged of air, the oxygen levels drop to nearly zero. This drastically reduces internal corrosion, scale buildup, and biological fouling (like algae), preserving the life of the EPDM seals and brass bodies inside the zone valve.