- Actuators
- Adapters
- Air Blowers
- Air Conditioners
- Air Curtains
- Air Purifiers
- Anemometers
- Axial fans
- Ball Valves
- Belimo
- Blowers
- Brackets
- Brass
- Brazing Rods
- Capacitors
- Carrier Parts
- Clamp Meters
- Cleaning Products
- Coatings
- Compressors
- Condensate Pumps
- Connectors
- Contactors
- Copper Capillary
- Copper Coils
- Copper Straight Tubes
- Copper Strainers
The UNI-T UT18E Voltage and Continuity Tester handles AC/DC measurements up to 1000V, three-phase rotation, and RCD testing. Combining a lightweight build with a dual LED/LCD readout, audible safety alarms, and a CAT IV 600V safety rating, it provides fast, reliable diagnostics for industrial and commercial use.
Why Choose and Prefer the UNI-T UT18E?
This tool offers reliable performance in industrial environments, combining ergonomic portability with an integrated buzzer alarm and unpowered testing capabilities for voltages from 100V to 1000V.
Measurement Specifications
| Measurement Function | Operational Range | Base Accuracy |
|---|---|---|
| AC/DC Voltage IndicationOperational RangeBase Accuracy | 6V | ±(1.5% + 1 digit) |
| 12V | ±(1.5% + 2 digits) | |
| 24V | ±(1.5% + 2 digits) | |
| 50V | ±(1.5% + 3 digits) | |
| 120V | ±(1.5% + 4 digits) | |
| 230V | ±(1.5% + 5 digits) | |
| 400V | ±(1.5% + 5 digits) | |
| 690V | ±(1.5% + 5 digits) | |
| 1000V | ±(1.5% + 5 digits) | |
| Phase Rotation Test | 100Vac to 400Vac (3-Phase) | Frequency: 50Hz to 60Hz |
| Continuity Test | 0Ω to 60kΩ | Auditory Beeper & LED Light Indication |
| RCD Test | Operating Voltage: 230V | Frequency: 50Hz to 400Hz |
| Unpowered Testing Mode | 100V to 1000V | LED/LCD Active Without Functional Battery Power |
| LCD Frequency Measurement | 40Hz to 400Hz | ±(3% + 5 digits) |
| Polarity Detection | Positive (+) & Negative (-) | Automatic identification & display |
Core Device Features
- 01
Dual Readout System:
Simultaneous LED segment and LCD screen voltage readouts.
- 02
Unpowered Testing Mode:
Measures active voltages (100V–1000V) without functional internal batteries.
- 03
Automatic Utility States:
Includes auto-ranging, self-inspection, and low-draw standby (<10µA).
- 04
Integrated Workspace Lighting:
Built-in flashlight for dark panels.
- 05
Silent Mode Operation:
Mutes audio indicators for quiet settings.
General & Mechanical Characteristics
- Physical Footprint:
- 272 mm x 85 mm x 31 mm.
- Total Tool Weight:
- 277 grams (with batteries).
- Safety Classifications:
- CAT III 1000V and CAT IV 600V.
- Compliance Standards:
- CE, UKCA, and RoHS.
Advantages Over Nearest Competitors
- 01
Extended Voltage Testing Boundaries:
Scales up to 1000V AC/DC, surpassing models capped at 690V.
- 02
Dual LED + LCD Diagnostics:
Provides stepped LED arrays alongside a digital LCD for cross-verification.
- 03
Advanced Low Impedance and RCD Testing:
Built-in RCD load testing prevents accidental breaker trips.
- 04
Resilient Safety Architecture:
Features 1100V over-voltage protection and CAT IV 600V safety compliance.
Safety Explained
What is an RCD? (Residual Current Device)
A Residual Current Device (RCD) is a critical, life-saving electrical safety component designed to prevent severe electric shocks and significantly reduce the risk of electrical fires. Unlike standard circuit breakers or fuses—which only protect wiring against massive overloads and short circuits—an RCD monitors electricity at a microscopic level to protect human life.
How Does It Work?
An RCD continuously monitors the balance of electrical current flowing through a circuit:
- 1
The Balance:
In a safe circuit, the current flowing in through the live wire must exactly equal the current returning out through the neutral wire.
- 2
The Leak:
If a fault occurs—such as someone accidentally touching a live wire or water getting into an appliance—some of the current leaks to the ground (earth).
- 3
The Trip:
The RCD instantly detects this tiny imbalance (the "residual current") and cuts off the electricity within milliseconds, stopping a potentially fatal electric shock before it can cause serious injury.
Why the RCD Test Function Matters in Test Meters
Premium electrical testers - like the UNI-T UT18E Voltage and Continuity Tester - come equipped with a built-in RCD Test Function.
When diagnosing a live circuit, the UNI-T UT18E can intentionally introduce a minor, highly controlled current imbalance. This allows electricians and maintenance teams to safely force-trip the system's installed RCD, verifying that the safety switch reacts within legally required, millisecond timeframes to guarantee the property is fully protected.

