- Actuators
- Adapters
- Air Blowers
- Air Conditioners
- Air Curtains
- Air Purifiers
- Anemometers
- Axial fans
- Ball Valves
- Belimo
- Blowers
- Brackets
- Brass
- Brazing Rods
- Capacitors
- Carrier Parts
- Clamp Meters
- Cleaning Products
- Coatings
- Compressors
- Condensate Pumps
- Connectors
- Contactors
- Copper Capillary
- Copper Coils
- Copper Straight Tubes
- Copper Strainers
UNI-T UT202+ True RMS Digital Clamp Meter
Features include 28mm Jaw Opening, 400A AC Current, K-Type Thermocouple Temperature, Capacitance, Frequency, Resistance and NCV Detection
The UNI-T UT202+ is a highly reliable, safe and accurate True RMS digital clamp meter. Designed in strict compliance with EN61010-2010 CAT II 600V / CAT III 300V safety ratings, it comes equipped with full-scale overload protection. It is the perfect tool for HVAC technicians, residential electricians, automobile mechanics, and industrial electrical maintenance.
The UT202+ has the capability to measure temperature with its K-Type Thermocouple Temperature probes which are included in the box.
[fluentform id="1"]
Measurement Specifications
| Function | Measuring Range | Accuracy |
|---|---|---|
| AC Current | 400A | ±(2%+10) |
| AC Current Frequency | 50Hz ~ 100Hz | ±(1%+5) |
| AC Voltage | 600V | ±(0.8%+5) |
| AC Voltage Frequency | 10Hz ~ 10kHz | ±(1%+5) |
| DC Voltage | 600VThe DC voltage is measured using the plug-in test leads, not through the jaw. | ±(0.5%+2) |
| Resistance | 40MΩ | ±(0.8%+2) |
| Capacitance | 4mF | ±(4%+5) |
| Temperature (Celsius) | -40°C ~ 1000°C | ±(1.5%+5) |
Core Device Features
- 01
Display Count
Maximum reading of 4000 counts
- 02
Auto Range
Automatically selects the optimal measurement range
- 03
Jaw Opening
28mm clamp diameter capacity
- 04
True RMS
Accurately measures distorted or non-sinusoidal AC waveforms
- 05
NCV
Integrated Non-Contact Voltage detection function
- 06
Continuity Test
Audible indicator for circuit loop verification
- 07
Diode
Tests diode semiconductor junctions
- 08
MAX/MIN
Captures and displays peak high and low readings
- 09
Relative Mode
Allows zeroing or reference point comparisons
- 10
Data Hold
Freezes the current measurement reading on-screen
- 11
LCD Backlight
Built-in screen illumination for dark work environments
- 12
Low Battery Indication
On-screen warning alert for low remaining battery life
- 13
Auto Power Off
Shuts down automatically when idle to preserve power
- 14
Overload Protection
Safety mechanism built to safeguard internal circuits across all ranges.
General & Mechanical Characteristics
Safety Rating
Certified to EN61010-2010 CAT II 600V / CAT III 300V standards
Power Source
Operates on two 1.5V R03 AAA batteries
Display Size
Screen dimensions measure 37mm x 25mm
Notice
The clamp jaw on the UT202+ is exclusively used for measuring AC current without breaking the circuit. To measure any voltage (either DC voltage or AC voltage), you must plug the standard black and red test leads into the input jacks at the bottom of the meter and touch them directly to your circuit test points.

