UNI-T UT204+ AC/DC True RMS Digital Clamp Meter

This AC/DC Digital Clamp Meter features a 28mm jaw opening, 600A AC/DC current capacity, capacitance, frequency, temperature, and NCV detection.

The UNI-T UT204+ is a high-accuracy, True RMS digital clamp meter specifically upgraded to handle both AC and DC current measurements directly through the clamp jaw.

Engineered to comply with safety standards EN61010-2010 CAT II 600V / CAT III 300V, it provides full-scale 600V overload protection across all measurement ranges. It is the ideal, professional-grade solution for complex troubleshooting in automobile electronics, HVAC/R systems, industrial setups, and residential systems.

The UT204+ has the capability to measure temperature with its K-Type Thermocouple Temperature probes which are included in the box.

Measurement Specifications

  • AC Current (Amperes): Up to 600A range with a precise accuracy rating of ±(2.5%+5) measured directly through the jaw.
  • DC Current (Amperes): Up to 600A range with a precise accuracy rating of ±(2.5%+5) measured directly through the jaw.
  • AC Current Frequency Response: Reads frequencies from 45Hz to 400Hz.
  • AC Voltage (V): Up to 600V range with an accuracy rating of ±(0.8%+5).
  • AC Voltage Frequency Response: Reads voltage frequencies across an expanded 45Hz to 400Hz spectrum.
  • DC Voltage (V): Up to 600V range with an accuracy rating of ±(0.5%+2).
  • High Voltage Frequency Measurement: Measures frequencies from 10Hz to 60kHz (input signal range: 5V~600V on the voltage position).
  • Resistance (Ω): High-range measurement up to 60MΩ with an accuracy rating of ±(0.8%+2).
  • Capacitance (F): Extended massive capacitance capability up to 60mF with an accuracy rating of ±(4%+5).
  • Temperature (°C): Measures standard temperature ranges from -40°C to 1000°C with an accuracy rating of ±(1.5%+5).
  • Frequency (Hz): Built-in low voltage frequency testing from 10Hz to 10MHz (input signal range: <30V on the Hz position).

Core Device Features

  • 01

    Display Count

    High-resolution 6000-count digital display screen.

  • 02

    True RMS

    Ensures highly precise measurements on both linear and distorted or non-sinusoidal AC current and voltage waveforms.

  • 03

    Jaw Opening Size

    Generous 28mm clamp diameter capacity to handle thick wire bundles.

  • 04

    NCV (Non-Contact Voltage)

    Multi-segment display accompanied by an audible/visual alarm for safe wire tracing.

  • 05

    Neutral/Live Wire Test

    Built-in direct measurement setting to easily differentiate live and neutral wires.

  • 06

    Zero Mode

    Dedicated one-touch button to clear out residual DC magnetization and optimize DC current precision.

  • 07

    Relative Mode

    Allows users to easily establish a baseline reference value for comparative testing.

  • 08

    Data Hold

    Instantly freezes the active measurement reading on-screen for easy reporting.

  • 09

    MAX/MIN Tracking

    Logs and displays peak high and low values during monitoring periods.

  • 10

    Continuity Test

    Integrated audible continuity function for rapid loop testing.

  • 11

    Diode Test

    Performs diagnostic semiconductor diode junction verification.

  • 12

    LCD Backlight

    High-contrast illuminated screen ensures perfect legibility in low-light environments.

  • 13

    Low Battery Indication

    Warns users when the power levels are depleted to prevent compromised readings.

  • 14

    Auto Power Off

    Conserves battery life by automatically shutting the device down when left idle.

  • 15

    Full-Scale Protection

    Upgraded 600V safety clamp barrier to safeguard the internal PCB across all ranges.

General & Mechanical Characteristics

Safety Classifications:
Officially certified under CAT II 600V and CAT III 300V safety levels.
Power Supply Requirements:
Powered by two standard 1.5V AAA batteries (R03).
Display Dimensions:
Compact, easy-to-read screen layout measuring 37mm x 25mm.
Product Housing Size:
Ergonomic handheld chassis measuring 215mm x 63mm x 36mm.
Net Weight:
Balanced lightweight tool weighing approximately 240g.
📦

What’s in the Box?

  • 1 x UNI-T UT204+ Digital Clamp Meter
  • 1 x Pair of Heavy-Duty Test Leads
  • 1 x Point Contact Temperature Thermocouple Probe
  • 2 x 1.5V Batteries
  • 1 x Premium Carrying Bag
  • 1 x English User Manual

Note: On the UNI-T UT204+, DC current is measured exclusively with the clamp jaw, not the test leads.


On the UNI-T UT204+, you must use the test leads to measure:

  • DC Voltage & AC Voltage
  • Resistance (Ohms)
  • Capacitance
  • Frequency / Duty Cycle (low-voltage electronic signals and high-voltage grid frequencies)
  • Diode Testing
  • Continuity Testing (audible circuit loop checking)
  • Neutral / Live Wire Testing (using a single lead to detect voltage)

Temperature on the UT204+ is measured using the included point-contact K-type thermocouple probe.

Advantages & Key Reasons to Prefer the UNI-T UT204+ Over 3280-10F


The UNI-T UT204+ offers distinct technical capabilities that make it the superior choice for general electronics, HVAC/R technicians, automotive diagnostics, and versatile electrical troubleshooting:

  1. DC Current Measurement (600A):
    • UNI-T UT204+ measures both AC and DC current directly through its clamp jaws. This is essential for DC circuits, automotive electrical work, solar panel installations, battery banks, and DC motor drives.
    • The 3280-10F only measures AC current. It cannot measure DC current at all.
  2. True RMS Accuracy:
    • UNI-T UT204+ features True RMS measurement. It provides accurate AC voltage and current readings even when non-sinusoidal or distorted waveforms are present (common with variable frequency drives, solid-state controls, and modern electronics).
    • The 3280-10F uses Average Rectifying (MEAN) sensing, which produces inaccuracies when measuring non-pure sine waves or non-linear loads.
  3. Expanded Diagnostic Functions:
    • Temperature Measurement: UNI-T UT204+ includes a K-type thermocouple probe for measuring temperatures from -40°C to 1000°C (crucial for HVAC/R motor heating checks or refrigeration testing).
    • Capacitance & Frequency: UNI-T UT204+ reads capacitance up to 60mF (ideal for checking motor run capacitors) and frequency up to 10MHz.
    • The 3280-10F lacks capacitance, temperature, and frequency functions completely.
  4. Safety & Non-Contact Detection:
    • UNI-T UT204+ Includes NCV (Non-Contact Voltage) detection with audible and visual LED alarms, as well as a LIVE line identification function.
  5. Display & Usability:
    • UNI-T UT204+ features a 6000-count display with a bright backlight for clear readings in dark control panels or equipment spaces.
    • The 3280-10F lacks a display backlight.

Recommended Pick

The UNI-T UT204+ should be preferred for almost all comprehensive electrical work. Its DC clamp capability, True RMS support, backlit screen, and added diagnostic features (capacitance and temperature) make it a far more complete and flexible instrument than the 3280-10F.

Superior Value Proposition

Better Value per Feature: The UNI-T UT204+ includes True RMS measurement, DC current clamp sensing, temperature probing, capacitance, and a backlit display—all features that are absent on the higher-priced 3280-10F.

Cost-Effective Fleet/Toolbox Outfitting: If equipping multiple technicians or service vehicles, choosing the UT204+ lowers upfront capital expenditure while providing a more versatile diagnostic instrument for field technicians.