- Actuators
- Adapters
- Air Blowers
- Air Conditioners
- Air Curtains
- Air Purifiers
- Anemometers
- Axial fans
- Ball Valves
- Belimo
- Blowers
- Brackets
- Brass
- Brazing Rods
- Capacitors
- Carrier Parts
- Clamp Meters
- Cleaning Products
- Coatings
- Compressors
- Condensate Pumps
- Connectors
- Contactors
- Copper Capillary
- Copper Coils
- Copper Straight Tubes
- Copper Strainers
UNI-T UT219DS AC/DC True RMS Professional Clamp Meter
UNI-T UT219DS Professional Clamp Meter, 33mm Jaw Opening, True RMS, Inrush Current Measurement and Advanced Electrical Diagnostics
The UNI-T UT219DS is a professional-grade, True RMS 600A clamp meter engineered specifically for demanding industrial, HVAC/R, and motor maintenance applications. It features full AC and DC measurement capability, supporting both AC and DC current up to 600A through the clamp jaws, alongside AC and DC voltage up to 1000V.
[fluentform id="1"]
The UNI-T UT219DS is industrially designed with IP54 rating and able to withstand 2 meters drop test for measurement in harsh environments. This series is suitable for professional electricians, HVAC/R and motor technicians.
The UNI-T UT219DS features a dual-display LCD specifically designed to show both Voltage (V) and Current (A) simultaneously on the same screen.
The UNI-T UT219DS features a dual-display LCD specifically designed to show both Voltage (V) and Current (A) simultaneously on the same screen.
Measurement Specifications
- AC Current (Jaw): Up to 600A
- DC Current (Jaw): Up to 600A
- DC Microamp (μA): Up to 2000μA (via test leads)
- AC Voltage: Up to 1000V
- DC Voltage: Up to 1000V
- LoZ AC Voltage: Up to 600V (Low Impedance input to eliminate ghost voltage)
- Resistance: Up to 60 (Ω)
- Capacitance: Up to 60mF
- Frequency: 10Hz to 10MHz (up to 40MHz)
- Duty Cycle: 0.1% to 99.9%
- Temperature: -40°C to 1000°C (-40°F to 1832°F)
- AC Voltage Frequency Response: 40Hz to 1kHz
- Sampling Rate: Digital display samples 5 times/second; 31-segment analog bar-graph samples 20 times/second
Core Device Features
- 01
Dual Display (Volt + Ampere)
Allows simultaneous display of Voltage and Current on a single screen.
- 02
3-Phase Motor Sequence Testing
Direct phase rotation measurement for motor installations up to 600V.
- 03
Inrush Current Measurement
Captures starting surge currents for motors and inductive loads.
- 04
Low Pass Filter (LPF)
Integrated 1kHz filter (3dB attenuation) to filter out high-frequency noise from Variable Frequency Drives (VFDs).
- 05
AC+DC Voltage Mode
Accurately evaluates combined AC and DC voltage components.
- 06
Zero & Relative Mode
Quick baseline zeroing for DC current clamp readings and relative testing.
- 07
MAX/MIN & Data Hold
Traps peak signals and freezes display values.
General & Mechanical Characteristics
- Ingress Protection Rating:
- IP54 rated (dust and splash water resistant) for harsh industrial environments.
- Drop Protection:
- Tested to withstand 2-meter drops without losing calibration or structural integrity.
- Safety Category Rating:
- Dual-rated CAT III 1000V / CAT IV 600V.
- Jaw Opening:
- 33mm jaw size.
- Display Structure:
- 6000-count dual-interface LCD screen with Auto Backlight sensing.
- Dimensions & Weight:
- Measures 234.6 × 82 × 47 mm and weighs 310g.
- Power Supply:
- Powered by three 1.5V AAA (R03) batteries.
Advantages Over Nearest Competitors
When compared to nearest field competitors in the industrial motor, facility maintenance, and power distribution class:
- Full DC Current Clamp Sensing: Unlike standard field meters that only offer low-level DC microamp measurements through test leads, the UT219DS measures up to 600A DC directly through the clamp jaws—essential for solar power arrays, battery backup banks, electric vehicles, and industrial DC drives.
- Dual Voltage + Current (Volt + Ampere) Screen: Features a dual-display interface that enables simultaneous monitoring of line voltage and load current on a single screen without cycling modes or taking multiple passes.
- Built-in 3-Phase Phase Rotation: Integrated 600V phase sequence detection allows technicians to verify 3-phase supply order during motor, pump, and switchgear commissioning without carrying a separate phase rotation tester.
- Higher Ingress & Impact Protection: Standard IP54 dust and water resistance paired with certified 2-meter drop-proof construction ensures long-term durability in outdoor, industrial, and heavy-use environments.
- Faster Refresh & High-Speed Resolution: Delivers a 5 Hz digital update rate and a 20 Hz analog bar-graph update rate for capturing fast signal fluctuations during system troubleshooting.
- Superior Cost-to-Performance Ratio: Delivers full professional capabilities—including full 600A AC and DC current clamping, AC+DC voltage modes, Low Pass Filtering (LPF) for Variable Frequency Drives, LoZ ghost voltage suppression, and high-capacity 60mF capacitance testing—at a far more accessible operational expenditure.

