- Actuators
- Adapters
- Air Blowers
- Air Conditioners
- Air Curtains
- Air Purifiers
- Anemometers
- Axial fans
- Ball Valves
- Belimo
- Blowers
- Brackets
- Brass
- Brazing Rods
- Capacitors
- Carrier Parts
- Clamp Meters
- Cleaning Products
- Coatings
- Compressors
- Condensate Pumps
- Connectors
- Contactors
- Copper Capillary
- Copper Coils
- Copper Straight Tubes
- Copper Strainers
Hidria 500mm, 230V 1Ph Axial Fan
Made in Slovenia, Europe
The Hidria R13R-5025A-4M-7088 (ordering code 0313-4-0333) is a high-performance AC axial fan designed primarily for commercial refrigeration, HVAC, and industrial cooling applications.
- Fan Diameter: 500 mm
- Model Number :R13R-5025A-4M-7088 (ordering code 0313-4-0333)
Model Code Breakdown
- R13: Product line/motor series indicator.
- R: External rotor AC motor type.
- 50: 500 mm nominal impeller diameter.
- 25: 25-degree blade pitch angle.
- A: Sucking / Suction airflow direction (pulls air over the motor).
- 4M: 4-pole, single-phase (Mains 230V) induction motor.
Electrical & Operational Performance
The standard parameters for a 500mm, 4-pole single-phase Hidria AC axial fan operating at standard line frequencies are structured below:
|
Parameter |
Specification Value (50 Hz / 60 Hz) |
| Nominal Voltage |
230 V AC (± 10%) |
|
Phase / Frequency |
1~ Phase | 50/60 Hz |
|
Rotational Speed |
1580 at 60Hz, 1400 at 50Hz |
|
Power Input |
~500 W to 740 W (Depending on static pressure) |
|
Current Draw |
~2.3 A to 3.2 A |
|
Maximum Airflow |
~5,500 to 6,500 m³/h (Free air delivery) |
Mechanical & Environmental Specs
- Blade Material: Stamped aluminum
- Bearing Type: Maintenance-free, sealed ball bearings with an estimated lifetime of 30,000 to 40,000 hours.
- Ingress Protection: IP54 rated (highly resistant to dust, water splashes, and moisture).
- Insulation Class: Class 155 (F) with integrated thermal overload protection.
- Ambient Operating Temp: -30 °C to +70 °C (Suitable for harsh outdoor climates and sub-zero cold room evaporators).
