- Actuators
- Adapters
- Air Blowers
- Air Conditioners
- Air Curtains
- Air Purifiers
- Anemometers
- Axial fans
- Ball Valves
- Belimo
- Blowers
- Brackets
- Brass
- Brazing Rods
- Capacitors
- Carrier Parts
- Clamp Meters
- Cleaning Products
- Coatings
- Compressors
- Condensate Pumps
- Connectors
- Contactors
- Copper Capillary
- Copper Coils
- Copper Straight Tubes
- Copper Strainers
UNI-T UT204+ AC/DC True RMS Digital Clamp Meter
This AC/DC Digital Clamp Meter features a 28mm jaw opening, 600A AC/DC current capacity, capacitance, frequency, temperature, and NCV detection.
The UNI-T UT204+ is a high-accuracy, True RMS digital clamp meter specifically upgraded to handle both AC and DC current measurements directly through the clamp jaw.
[fluentform id="1"]
Engineered to comply with safety standards EN61010-2010 CAT II 600V / CAT III 300V, it provides full-scale 600V overload protection across all measurement ranges. It is the ideal, professional-grade solution for complex troubleshooting in automobile electronics, HVAC/R systems, industrial setups, and residential systems.
The UT204+ has the capability to measure temperature with its K-Type Thermocouple Temperature probes which are included in the box.
Measurement Specifications
- AC Current (Amperes): Up to 600A range with a precise accuracy rating of ±(2.5%+5) measured directly through the jaw.
- DC Current (Amperes): Up to 600A range with a precise accuracy rating of ±(2.5%+5) measured directly through the jaw.
- AC Current Frequency Response: Reads frequencies from 45Hz to 400Hz.
- AC Voltage (V): Up to 600V range with an accuracy rating of ±(0.8%+5).
- AC Voltage Frequency Response: Reads voltage frequencies across an expanded 45Hz to 400Hz spectrum.
- DC Voltage (V): Up to 600V range with an accuracy rating of ±(0.5%+2).
- High Voltage Frequency Measurement: Measures frequencies from 10Hz to 60kHz (input signal range: 5V~600V on the voltage position).
- Resistance (Ω): High-range measurement up to 60MΩ with an accuracy rating of ±(0.8%+2).
- Capacitance (F): Extended massive capacitance capability up to 60mF with an accuracy rating of ±(4%+5).
- Temperature (°C): Measures standard temperature ranges from -40°C to 1000°C with an accuracy rating of ±(1.5%+5).
- Frequency (Hz): Built-in low voltage frequency testing from 10Hz to 10MHz (input signal range: <30V on the Hz position).
Core Device Features
- 01
Display Count
High-resolution 6000-count digital display screen.
- 02
True RMS
Ensures highly precise measurements on both linear and distorted or non-sinusoidal AC current and voltage waveforms.
- 03
Jaw Opening Size
Generous 28mm clamp diameter capacity to handle thick wire bundles.
- 04
NCV (Non-Contact Voltage)
Multi-segment display accompanied by an audible/visual alarm for safe wire tracing.
- 05
Neutral/Live Wire Test
Built-in direct measurement setting to easily differentiate live and neutral wires.
- 06
Zero Mode
Dedicated one-touch button to clear out residual DC magnetization and optimize DC current precision.
- 07
Relative Mode
Allows users to easily establish a baseline reference value for comparative testing.
- 08
Data Hold
Instantly freezes the active measurement reading on-screen for easy reporting.
- 09
MAX/MIN Tracking
Logs and displays peak high and low values during monitoring periods.
- 10
Continuity Test
Integrated audible continuity function for rapid loop testing.
- 11
Diode Test
Performs diagnostic semiconductor diode junction verification.
- 12
LCD Backlight
High-contrast illuminated screen ensures perfect legibility in low-light environments.
- 13
Low Battery Indication
Warns users when the power levels are depleted to prevent compromised readings.
- 14
Auto Power Off
Conserves battery life by automatically shutting the device down when left idle.
- 15
Full-Scale Protection
Upgraded 600V safety clamp barrier to safeguard the internal PCB across all ranges.
General & Mechanical Characteristics
- Safety Classifications:
- Officially certified under CAT II 600V and CAT III 300V safety levels.
- Power Supply Requirements:
- Powered by two standard 1.5V AAA batteries (R03).
- Display Dimensions:
- Compact, easy-to-read screen layout measuring 37mm x 25mm.
- Product Housing Size:
- Ergonomic handheld chassis measuring 215mm x 63mm x 36mm.
- Net Weight:
- Balanced lightweight tool weighing approximately 240g.
📦
What’s in the Box?
- 1 x UNI-T UT204+ Digital Clamp Meter
- 1 x Pair of Heavy-Duty Test Leads
- 1 x Point Contact Temperature Thermocouple Probe
- 2 x 1.5V Batteries
- 1 x Premium Carrying Bag
- 1 x English User Manual
Note: On the UNI-T UT204+, DC current is measured exclusively with the clamp jaw, not the test leads.
On the UNI-T UT204+, you must use the test leads to measure:
- DC Voltage & AC Voltage
- Resistance (Ohms)
- Capacitance
- Frequency / Duty Cycle (low-voltage electronic signals and high-voltage grid frequencies)
- Diode Testing
- Continuity Testing (audible circuit loop checking)
- Neutral / Live Wire Testing (using a single lead to detect voltage)
Temperature on the UT204+ is measured using the included point-contact K-type thermocouple probe.
Advantages & Key Reasons to Prefer the UNI-T UT204+ Over 3280-10F
The UNI-T UT204+ offers distinct technical capabilities that make it the superior choice for general electronics, HVAC/R technicians, automotive diagnostics, and versatile electrical troubleshooting:
-
DC Current Measurement (600A):
- UNI-T UT204+ measures both AC and DC current directly through its clamp jaws. This is essential for DC circuits, automotive electrical work, solar panel installations, battery banks, and DC motor drives.
- The 3280-10F only measures AC current. It cannot measure DC current at all.
-
True RMS Accuracy:
- UNI-T UT204+ features True RMS measurement. It provides accurate AC voltage and current readings even when non-sinusoidal or distorted waveforms are present (common with variable frequency drives, solid-state controls, and modern electronics).
- The 3280-10F uses Average Rectifying (MEAN) sensing, which produces inaccuracies when measuring non-pure sine waves or non-linear loads.
-
Expanded Diagnostic Functions:
- Temperature Measurement: UNI-T UT204+ includes a K-type thermocouple probe for measuring temperatures from -40°C to 1000°C (crucial for HVAC/R motor heating checks or refrigeration testing).
- Capacitance & Frequency: UNI-T UT204+ reads capacitance up to 60mF (ideal for checking motor run capacitors) and frequency up to 10MHz.
- The 3280-10F lacks capacitance, temperature, and frequency functions completely.
-
Safety & Non-Contact Detection:
- UNI-T UT204+ Includes NCV (Non-Contact Voltage) detection with audible and visual LED alarms, as well as a LIVE line identification function.
-
Display & Usability:
- UNI-T UT204+ features a 6000-count display with a bright backlight for clear readings in dark control panels or equipment spaces.
- The 3280-10F lacks a display backlight.
Recommended Pick
The UNI-T UT204+ should be preferred for almost all comprehensive electrical work. Its DC clamp capability, True RMS support, backlit screen, and added diagnostic features (capacitance and temperature) make it a far more complete and flexible instrument than the 3280-10F.
Superior Value Proposition
Better Value per Feature: The UNI-T UT204+ includes True RMS measurement, DC current clamp sensing, temperature probing, capacitance, and a backlit display—all features that are absent on the higher-priced 3280-10F.
Cost-Effective Fleet/Toolbox Outfitting: If equipping multiple technicians or service vehicles, choosing the UT204+ lowers upfront capital expenditure while providing a more versatile diagnostic instrument for field technicians.

