- Actuators
- Adapters
- Air Blowers
- Air Conditioners
- Air Curtains
- Air Purifiers
- Anemometers
- Axial fans
- Ball Valves
- Belimo
- Blowers
- Brackets
- Brass
- Brazing Rods
- Capacitors
- Carrier Parts
- Clamp Meters
- Cleaning Products
- Coatings
- Compressors
- Condensate Pumps
- Connectors
- Contactors
- Copper Capillary
- Copper Coils
- Copper Straight Tubes
- Copper Strainers
WIPCOOL R1 Refrigeration Oil Charging Pump
Main Features
- Applied stainless steel materials, reliable and durable
- Anti-backflow structure, ensure system safety during charging
- Special design, ensure to connect the different size of oil bottles
- Pumps oil into the system without shutting down for charging
The R1 Refrigeration Oil Hand Charging Pump allows for the addition or removal of refrigeration oil when servicing air conditioning and refrigeration systems.
The pump can be used while the unit is operating, so there's no need to shut down the system for charging. It is compatible with one-gallon, two-and-a-half-gallon, and five-gallon containers, and it moves 1.7 fl. oz. (50ml) per stroke against 145 psi (10 bar) pressure.
| Model | R1 |
|
Max. Pump Pressure |
10 bar (145 psi) |
| Max. Pump Rate Per Stroke | 50ml |
| Applicable Oil Bottle Size | All Sizes |
| Hose Connect | 1/4" SAE |
| Outlet Hose | 1.5m Charging Hose |
| Packing & Weight | Carton:10Pcs/ 18.0 Kgs |
WIPCOOL R2 Refrigeration Oil Charging Pump
Main Features
- Applied stainless steel materials, reliable and durable
- Anti-backflow structure, ensure system safety during charging
- Special design, ensure to connect the different size of oil bottles
- Pumps oil into the system without shutting down for charging
The R2 oil charging pump is designed and manufactured to allow technicians to pump oil into the system while the unit is operating. There is no need to shut down the system for charging.
Features a universal stopper that automatically adjusts to all standard openings in 1, 2-1/2, and 5-gallon oil containers. Suction transfer hose and fittings are included. The pump allows you to inject oil into the compressor on the downstroke while the system is under pressure, making the process easier with a positive stroke.
| Model | R2 |
|
Max. Pump Pressure |
15 bar (218 psi) |
| Max. Pump Rate Per Stroke | 75ml |
| Applicable Oil Bottle Size | All Sizes |
| Hose Connect | 1/4" & 3/8" SAE |
| Outlet Hose | 1.5m HP Charging Hose |
| Packing & Weight | Carton:6Pcs/ 18.0 Kgs |
WIPCOOL R4 ELECTRIC REFRIGERATION OIL CHARGING PUMP
R4 is a portable refrigeration oil transfer pump which is ideal for charging compressor oil into large HVAC systems. With a 1/3 HP electric motor directly coupled to a fixed-displacement gear pump, oil can be pumped into your system even while in operation.
Built-in thermal overload protector for effectively preventing overload and a ball-type check valve is installed inside of the R4 pump to prevent oil or refrigerant from flowing back in case of a power failure or breakdown. This keeps the HVAC system in a safe situation.
| Model |
R4 |
| Voltage |
230V~/50Hz |
| Motor Power |
1/3HP |
| Pump to System Pressure (Max.) |
16bar (232 psi) |
| Flow Rate (Max.) |
150L/h |
| Hose Connection | 1/4" & 3/8" SAE |
Large Chiller Needs Oil?
WIPCOOL electric oil charging pumps can pump large quantities of oils into large chillers in very short time.
WIPCOOL electric oil charging pumps can pump large quantities of oils into large chillers in very short time.
WIPCOOL HB-3 Tube Bender for Tube OD 1/4″ 5/16″ 3/8″
WIPCOOL R6 Electric Refrigeration Oil Charging Pump
R6 is a heavy-duty refrigeration oil transfer pump which is ideal for charging compressor oil into large HVAC systems. With a 3/4 HP electric motor directly coupled to a high displacement gear pump, different viscosity oils (even the high viscosity in low temperature) can be pumped into your chiller even while the chiller is in operation.
Built-in thermal overload protector for effectively preventing overload and a ball-type check valve is installed inside of the pump to prevent oil or refrigerant from flowing back in case of a power failure or breakdown. In addition, an overhead pressure gauge is installed to make it easy to read the exact operation pressure.
So R6 is the ultimate solution for refrigeration oil charging.
| Model | R6 |
| Voltage | 230V~/50Hz |
| Motor Power | 3/4HP |
| Pump to System Pressure (Max.) | 25bar (362 psi) This is the maximum pressure that R6 can pump to inside the chiller or system. |
| Flow Rate (Max.) | 350L/h |
| Hose Connection | 1/4" & 3/8" SAE |
Large Chiller Needs Oil?
WIPCOOL electric oil charging pumps can pump large quantities of oils into large chillers in very short time.
WIPCOOL electric oil charging pumps can pump large quantities of oils into large chillers in very short time.
WIPCOOL HC-19 Tube Cutter
Spring Mechanism, Fast & safe cutting
Product Description
- The Spring design prevents the crush of soft tubes.
- Made from wear-resistant steel blades ensures a durable and sturdy usage
- The rollers and the blade utilize ball bearings for smoother action.
- Stable roller tracking system keeps tube from threading
- An additional blade comes with the tool and be stored in the knob
|
Model |
HC-19 |
|---|---|
| Tubing O.D |
1/8" ~ 3/4" 3 ~ 9 mm |
WIPCOOL HC-32 Tube Cutter
Spring Mechanism, Fast & safe cutting
Product Description
- The Spring design prevents the crush of soft tubes.
- Made from wear-resistant steel blades ensures a durable and sturdy usage
- The rollers and the blade utilize ball bearings for smoother action.
- Stable roller tracking system keeps tube from threading
- An additional blade comes with the tool and be stored in the knob
|
Model |
HC-32 |
|---|---|
| Tubing O.D |
3/16” ~ 1-1/4” 4 ~ 32mm |
WIPCOOL HC-54 Tube Cutter
Spring Mechanism, Fast & safe cutting
Product Description
- The Spring design prevents the crush of soft tubes.
- Made from wear-resistant steel blades ensures a durable and sturdy usage
- The rollers and the blade utilize ball bearings for smoother action.
- Stable roller tracking system keeps tube from threading
- An additional blade comes with the tool and be stored in the knob
|
Model |
HC-54 |
|---|---|
| Tubing O.D |
1/4” ~ 2-1/8” 6 ~ 54mm |
