- Actuators
- Adapters
- Air Blowers
- Air Conditioners
- Air Curtains
- Air Purifiers
- Anemometers
- Axial fans
- Ball Valves
- Belimo
- Blowers
- Brackets
- Brass
- Brazing Rods
- Capacitors
- Carrier Parts
- Clamp Meters
- Cleaning Products
- Coatings
- Compressors
- Condensate Pumps
- Connectors
- Contactors
- Copper Capillary
- Copper Coils
- Copper Straight Tubes
- Copper Strainers
WIPCOOL 2F2BRK Cordless Vacuum Pump 5CFM
Dual Power Allows Easy Switch
- Never suffer from low battery anxiety
- Freely switch between AC power and battery power. Yes, the 2F2BRK allows you to easily switch between battery power and AC power.
- Avoid downtime on the job site
- Work in sites where AC power is not available
Product Description
The WIPCOOL F Series of dual power vacuum pumps are based on cordless vacuum pumps and can be easily switched between 18V Li-ion batteries and 220V AC power. The WIPCOOL 2F2BRK can enable up to 45-60 minutes of operation time when using a 18V/4.0Ah capacity Li-ion battery, solving the problem of finding AC power supply for outdoor work. If AC power is relatively easy to obtain, it can provide long-term operation to avoid the anxiety of Li-ion battery depletion in a short time.
The WIPCOOL 2F2BRK is rated at 5 CFM. The 2F2BRK is compatible with the new generation A2L refrigerants as well as backward compatible with older refrigerants like R22, R134a, R404a, R410a, etc.
The WIPCOOL 2F2BRK is equipped with a built-in solenoid valve and overhead vacuum meter as standard. In addition, the 2F2BRK is built with a reinforced aluminum alloy oil tank, has effective heat dissipation and is resistant to chemical corrosion. The oil color and oil level are easy to see with the oversized sight glass.
The WIPCOOL 2F2BRK comes with a Makita battery adaptor. You can use any Makita battery on the 2F2BRK
easily and safely.
Read More About The WIPCOOL 2F2BRK VACUUM PUMPS
Wipcool 2F2BRK vacuum pump
| Model | 2F2BRK |
| Battery | DC18V 9.6AH |
| AC Voltage | 230V~/50Hz |
| Ultimate Vacuum | 15 Microns |
| Input Power | 1/2HP |
| Flow Rate (Max.) | 5CFM, 142L/min |
| Oil Capacity | 450ml |
|
Weight |
5.5kg |
|
Dimension |
500 x 315 x 255 mm |
| Battery Run Time | Approximately 60 minutes depending on job conditions and other variables. |
WIPCOOL 2F3R DUAL STAGE VACUUM PUMPS
Main Features of F Series:
- Non-sparking design: suitable for use with A2L refrigerants (R32, R1234YF) and other refrigerants
- (R410A, R22, R134a, etc.)
- Brushless motor technology.
- More than 25% lighter than similar products.
- Built-in solenoid valve to prevent backflow to system.
- Overhead vacuum gauge, compact design and easy to read.
- Integral cylinder structure to guarantee reliability.
Characteristics of Refrigerant 32 (R32) & The Need for Proper HVAC Tools
R-32 is a next generation refrigerant that efficiently carries heat and has lower environmental impact. It can reduce electricity consumption up to approximately 10% compared to that of air conditioners using refrigerant R-22.
Furthermore, compared to the refrigerants widely used today such as R-22 and R-410A, R-32 has a global warming potential (GWP) that is 1/3 lower and is remarkable for its low environmental impact. So all large manufacturers are promoting it as the new refrigerant in the market.
Due to the flammability and high operating pressures of R32, existing equipment (e.g. manifolds, gauges, vacuum pumps, recovery units) must be checked for compatibility. Any potential sources of ignition from electrical equipment must be eliminated.
WIPCOOL F series vacuum pumps are specially designed for this new generation refrigerant R32. The F Series can be used with (A2L or A2) flammable refrigerants and are backward compatible with old refrigerants (such as R12, R22, R134a, R404a, R410a, etc.).
F Series are equipped with built-in solenoid valves and overhead vacuum meters as standard. In addition, the F Series come with reinforced aluminum alloy oil tanks, provide effective heat dissipation and offer better resistance to chemical corrosion.
The oil color and level are easy to see with the oversized sight glass. The powerful and lightweight motor delivers high efficiency with long service life.
Read More About The WIPCOOL F SERIES DUAL STAGE VACUUM PUMPS
Wipcool F series vacuum pump
| Model | 2F2R | 2F3R | 2F4R | 2F5R |
| Voltage | 230V~/50-60Hz or 115V~/60Hz | |||
| Ultimate Vacuum | 15 Microns | |||
| Input Power | 1/2HP | 3/4HP |
1 HP |
1 HP |
| Flow Rate (Max.) | 5CFM, 142L/min | 7CFM, 198 L/min | 9CFM, 255 L/min | 11CFM, 312 L/min |
| Oil Capacity | 450ml | 520ml | 500ml | 480ml |
|
Weight |
6.5kg | 9.8kg | 10kg | 10.2kg |
|
Dimension |
339 x 130 x 225 mm | 410 x 150 x 250 mm | 410 x 150 x 250 mm | 410 x 150 x 250 mm |
|
Inlet Port |
1/4" & 3/8" SAE | 1/4" & 3/8" SAE | 1/4" & 3/8" SAE | 1/4" & 3/8" SAE |
WIPCOOL 2F4R DUAL STAGE VACUUM PUMPS
Main Features of F Series:
- Non-sparking design: suitable for use with A2L refrigerants (R32, R1234YF) and other refrigerants
- (R410A, R22, R134a, etc.)
- Brushless motor technology.
- More than 25% lighter than similar products.
- Built-in solenoid valve to prevent backflow to system.
- Overhead vacuum gauge, compact design and easy to read.
- Integral cylinder structure to guarantee reliability.
Characteristics of Refrigerant 32 (R32) & The Need for Proper HVAC Tools
R-32 is a next generation refrigerant that efficiently carries heat and has lower environmental impact. It can reduce electricity consumption up to approximately 10% compared to that of air conditioners using refrigerant R-22.
Furthermore, compared to the refrigerants widely used today such as R-22 and R-410A, R-32 has a global warming potential (GWP) that is 1/3 lower and is remarkable for its low environmental impact. So all large manufacturers are promoting it as the new refrigerant in the market.
Due to the flammability and high operating pressures of R32, existing equipment (e.g. manifolds, gauges, vacuum pumps, recovery units) must be checked for compatibility. Any potential sources of ignition from electrical equipment must be eliminated.
WIPCOOL F series vacuum pumps are specially designed for this new generation refrigerant R32. The F Series can be used with (A2L or A2) flammable refrigerants and are backward compatible with old refrigerants (such as R12, R22, R134a, R404a, R410a, etc.).
F Series are equipped with built-in solenoid valves and overhead vacuum meters as standard. In addition, the F Series come with reinforced aluminum alloy oil tanks, provide effective heat dissipation and offer better resistance to chemical corrosion.
The oil color and level are easy to see with the oversized sight glass. The powerful and lightweight motor delivers high efficiency with long service life.
Read More About The WIPCOOL F SERIES DUAL STAGE VACUUM PUMPS
Wipcool F series vacuum pump
| Model | 2F2R | 2F3R | 2F4R | 2F5R |
| Voltage | 230V~/50-60Hz or 115V~/60Hz | |||
| Ultimate Vacuum | 15 Microns | |||
| Input Power | 1/2HP | 3/4HP |
1 HP |
1 HP |
| Flow Rate (Max.) | 5CFM, 142L/min | 7CFM, 198 L/min | 9CFM, 255 L/min | 11CFM, 312 L/min |
| Oil Capacity | 450ml | 520ml | 500ml | 480ml |
|
Weight |
6.5kg | 9.8kg | 10kg | 10.2kg |
|
Dimension |
339 x 130 x 225 mm | 410 x 150 x 250 mm | 410 x 150 x 250 mm | 410 x 150 x 250 mm |
|
Inlet Port |
1/4" & 3/8" SAE | 1/4" & 3/8" SAE | 1/4" & 3/8" SAE | 1/4" & 3/8" SAE |
WIPCOOL 2F5R DUAL STAGE VACUUM PUMPS
Main Features of F Series:
- Non-sparking design: suitable for use with A2L refrigerants (R32, R1234YF) and other refrigerants
- (R410A, R22, R134a, etc.)
- Brushless motor technology.
- More than 25% lighter than similar products.
- Built-in solenoid valve to prevent backflow to system.
- Overhead vacuum gauge, compact design and easy to read.
- Integral cylinder structure to guarantee reliability.
Characteristics of Refrigerant 32 (R32) & The Need for Proper HVAC Tools
R-32 is a next generation refrigerant that efficiently carries heat and has lower environmental impact. It can reduce electricity consumption up to approximately 10% compared to that of air conditioners using refrigerant R-22.
Furthermore, compared to the refrigerants widely used today such as R-22 and R-410A, R-32 has a global warming potential (GWP) that is 1/3 lower and is remarkable for its low environmental impact. So all large manufacturers are promoting it as the new refrigerant in the market.
Due to the flammability and high operating pressures of R32, existing equipment (e.g. manifolds, gauges, vacuum pumps, recovery units) must be checked for compatibility. Any potential sources of ignition from electrical equipment must be eliminated.
WIPCOOL F series vacuum pumps are specially designed for this new generation refrigerant R32. The F Series can be used with (A2L or A2) flammable refrigerants and are backward compatible with old refrigerants (such as R12, R22, R134a, R404a, R410a, etc.).
F Series are equipped with built-in solenoid valves and overhead vacuum meters as standard. In addition, the F Series come with reinforced aluminum alloy oil tanks, provide effective heat dissipation and offer better resistance to chemical corrosion.
The oil color and level are easy to see with the oversized sight glass. The powerful and lightweight motor delivers high efficiency with long service life.
Read More About The WIPCOOL F SERIES DUAL STAGE VACUUM PUMPS
Wipcool F series vacuum pump
| Model | 2F2R | 2F3R | 2F4R | 2F5R |
| Voltage | 230V~/50-60Hz or 115V~/60Hz | |||
| Ultimate Vacuum | 15 Microns | |||
| Input Power | 1/2HP | 3/4HP |
1 HP |
1 HP |
| Flow Rate (Max.) | 5CFM, 142L/min | 7CFM, 198 L/min | 9CFM, 255 L/min | 11CFM, 312 L/min |
| Oil Capacity | 450ml | 520ml | 500ml | 480ml |
|
Weight |
6.5kg | 9.8kg | 10kg | 10.2kg |
|
Dimension |
339 x 130 x 225 mm | 410 x 150 x 250 mm | 410 x 150 x 250 mm | 410 x 150 x 250 mm |
|
Inlet Port |
1/4" & 3/8" SAE | 1/4" & 3/8" SAE | 1/4" & 3/8" SAE | 1/4" & 3/8" SAE |
WIPCOOL ALD-2 Heated Diode Refrigerant Leak Detector
Main Features
- Flexible Probe
- High Precision & Sensitivity Sensor
- LCD Display
| Model | ALD-2 |
| Sensor Type | Heated Diode Gas Sensor |
| Minimum detectable leakage | ≤3 g/year |
| Reaction Time | ≤3 Seconds |
| Warm-up Time | 30 Seconds |
| Reset Time | ≤10 Seconds |
| Operating Temperature Range | 0 - 50ºC |
| Operating Humidity Range | <80%RH (Non-condensing) |
| Applicable refrigerant | CFCs, HCFCs, HFCs, HCs and HFOs |
| Sensor Lifetime | ≥ 1 year |
| Reset | Automatic / Manual |
| Probe Length | 420 mm (16.5 in) |
| Battery | 3 x AA Alkaline Battery, 7 Hours Continuous Working |
WIPCOOL ALM40 Laser Distance Meter
Main Features
- Area measurement
- Single measurement
- Volume measurement
- Double pythagorean measurement
- Multiple measurements
- One pythagorean measurement
| Model | ALM40 |
| Accuracy of Measurement | ±5mm* |
| Unit | m/in/ft |
| Measuring Range (no reflector) | 0.3 - 20m/30m/40m |
| Measuring Time | 0.3-4 seconds |
| Laser Type | 620~670nm, <1mw |
| Self Closing Laser | 15 Seconds |
| Automatic Shutdown | 45 Seconds |
| Display Lighting | White LED |
| Battery Type & Life | 2*1.5V AAA Alkaline Batteries, Single Measurement About 5000 Times |
| Product Size | 90*40*24mm |
| Packing | Carton:50 Pcs |
WIPCOOL C10 Portable Coil Cleaning Machine
Main Features
- Reel structure, free to release and retract the inlet and outlet hose.
- Two pressure optional, meet the different cleaning requirement.
- Built-in pressure controller, suspend automatically.
- Medium pressure, safety for coils cleaning to avoid fins damage.
Product Features
The C10 is a professional air conditioning coil cleaning machine that uses an AC power supply. It can operate in low-pressure mode (3-5 bar) and high-pressure mode (7-10 bar). The pressure can be adjusted by simply pressing the top button, allowing for safe cleaning of indoor and outdoor coils.
Because of the self priming function, so you can use an external water tank to solve water source problem. At the same time, it is equipped with various professional cleaning accessories, such as a 290º rotating nozzle with a 37cm extension wand, which can easily penetrate into narrow gaps for cleaning. The product is lightweight and portable, and can be carried away with one hand.
| Model | C10 |
| Voltage | 230V~/50-60Hz or 100-120V~/50-60Hz |
| Working Pressure | 3-5 / 7-10 bar (Dual) |
| Flow Rate(Max.) | 4L/min |
| Motor Power | 100W |
| Weight | 3.7 Kg |
| Inlet Hose | 2.5m |
| Outlet Hose | 5.0m |
WIPCOOL C10B Cordless Coil Cleaning Machine
Main Features
- Reel structure, free to release and retract the inlet and outlet hose.
- Two pressure optional, meet the different cleaning requirement.
- Built-in pressure controller, suspend automatically.
- Li-ion battery powered, get rid of site power limitations.
Product Features
C10B is a professional cordless air conditioning cleaning machine that can operate in low pressure mode of 3 to 5 bar and high pressure mode of 7 to 10 bar.The pressure section can be adjusted by simply pressing the top button, allowing for safety cleaning of the inner and outer coils.
Because of the self priming function, so you can use an external water tank to solve water source problem. At the same time, it is equipped with various professional cleaning accessories, such as a 290º rotating nozzle with a 37cm extension wand, which can easily penetrate into narrow gaps for cleaning. The product is lightweight and portable, and can be carried away with one hand.
Using an 18V Li-ion battery for power supply means there is no need to search for AC power sources everywhere, especially when cleaning outdoor air conditioning units. In addition, In order to maximize the utilization of existing Li-ion batteries in users’ hands and reduce their purchasing costs, we have specially developed 6 mainstream brand battery adapters (Makita and Dewalt) which can easily be compatible with the use of the above brand batteries.
| Model | C10B |
| Voltage | 18V(AEG/RIDGID Interface) |
| Working Pressure | 3-5 / 7-10 bar (Dual) |
| Flow Rate(Max.) | 4L/min |
| Motor Power | 80W |
| Weight | 3.7 Kg (w/o battery) |
| Inlet Hose | 2.5m |
| Outlet Hose | 5.0m |
| Reference Running Time | 50-120mins (4.0Ah Li-ion battery) |
| Reference Charging Time | 210 mins (4.0Ah Li-ion battery) |
WIPCOOL C10BW Integrated Coil Cleaning Machine
Main features
- Provides excellent mobility, equipped with wheels and a push handle.
- Two power options are available: AC-powered or 18V Li-ion powered.
- Integrated solution with an 18L clean water tank and a 2L chemical tank.
- Offers excellent mobility and includes a back strap for ultimate portability.
The integrated coil cleaning machine C10Bw is ideal for cleaning in locations where water and power may be inaccessible. It can be powered by AC or an 18V lithium battery and offers 6 optional battery adapters. You can use your own batteries if they are compatible with any of these adapters.
In addition, this machine provides a fully integrated coil cleaning solution with an 18L clean water tank and a 2L chemical tank. The trolley case design offers excellent mobility, and an optional back strap allows you to carry the cleaning machine hands-free, making it easy to climb ladders to specific job sites, such as attics or roofs. This versatility makes it suitable for almost any coil cleaning application.
Unlike traditional high-pressure cleaning machines and low-pressure sprayers, this machine is specially designed for HVAC coils, providing two adjustable cleaning pressures. You can select between 5 bar and 10 bar depending on the cleaning requirements, ensuring the cleanest coils you've ever had.
| Model | C10BW |
| Voltage | 18V (AEG/ RIDGID interface) |
| Pressure | 3-5 /7-10 bar (Dual) |
| Flow Rate(Max.) | 4L/min |
| Reference Running Time | 50-120mins (4.0AhLi-ion battery) |
| Reference Charging Time | 210 mins.(4.0AhLi-ion battery) |
| Motor Power | 80W |
| Tank Capacity | 18L clean water tank +2L chemical tank |
| Outlet Hose | 5m |
| Weight (Dry) | 6.6kg (w/o battery) |
WIPCOOL C28T Crankshaft Driven High Pressure Cleaning Machine
- Industrial grade reliable and durable
- Variable pressure (5-28bar) for optimal flexibility to meet the different occasions
- Crankshaft-driven pump with ceramic coated pistons for long service life.
- Large oil level sight glass, easily accessible to check oil status, and ready for oil change in time for maintenance.
The C28T is a professional high-pressure equipment specifically designed for the HVAC cleaning industry. It features a crankshaft-driven pump with ceramic-coated pistons for long service life, enabling continuous operation.
With its adjustable working pressure ranging from 5 to 28 bar, it offers optimal flexibility for cleaning, effectively removing even the toughest dirt from condenser and evaporator coils without damaging the sensitive fins.
Its small size and light weight provide great portability, making it easy to carry in one hand.
| Model | C28T |
| Voltage | 230V~/50-60Hz or 100-120V/50-60Hz |
| Working Pressure | 5-28bar(adjustable) |
| Flow Rate (Max.) | 4.5L/min |
| Output Power | 3/4HP |
| Weight | 8.5kg |
| Water Pipe | 2m inlet hose, 7m outlet hose |
WIPCOOL C110T Crankshaft Driven Super High Pressure Washer with Dolly
Main Features
- Compact, durable, and powerful.
- Variable pressure range (10-90 bar) offers optimal flexibility to suit various applications.
- Crankshaft-driven brass pump with ceramic-coated pistons ensures extended service life.
- Large oil level sight glass allows for easy monitoring of oil status, ensuring timely oil changes for maintenance.
- Dolly is available separately. ModelNo: Dolly110
The C110T is a professional high-pressure, heavy-duty machine, compact on the outside yet powerful on the inside. It features a crankshaft-driven brass pump, enabling continuous operation.
It is the ideal all-around solution for an industrial pressure washer, perfect for cleaning industrial environments and meeting facility management and maintenance needs.
With its compact size, this equipment is highly portable, allowing for easy one-handed carrying or convenient mounting on a trolley.
| Model | C110T |
| Voltage | 230V~/50-60Hz or 115V~/60Hz |
| Max. Pressure | 110 bar |
| Operation Pressure | 90 bar |
| Input Power | 3 HP |
| Inlet water pressure | 3 bar |
| Flow Rate | 9L/min |
| Weight | 26.0 kgs |