- Actuators
- Adapters
- Air Blowers
- Air Conditioners
- Air Curtains
- Air Purifiers
- Anemometers
- Axial fans
- Ball Valves
- Belimo
- Blowers
- Brackets
- Brass
- Brazing Rods
- Capacitors
- Carrier Parts
- Clamp Meters
- Cleaning Products
- Coatings
- Compressors
- Condensate Pumps
- Connectors
- Contactors
- Copper Capillary
- Copper Coils
- Copper Straight Tubes
- Copper Strainers
WIPCOOL 2F2BRK Cordless Vacuum Pump 5CFM
Recommended Minimum Battery Size is 9.6AH 18 Volts
Dual Power Allows Easy Switch
Want to power your WIPCOOL device directly from a 220V mains outlet?
Use the BC-18P battery connector to run on 220V mains power if your battery is low, or while it is recharging.
WIPCOOL gives you the freedom of both cordless and electrical power.
WIPCOOL 2F3R DUAL STAGE VACUUM PUMPS
Main Features of F Series:
- Non-sparking design: suitable for use with A2L refrigerants (R32, R1234YF) and other refrigerants
- (R410A, R22, R134a, etc.)
- Brushless motor technology.
- More than 25% lighter than similar products.
- Built-in solenoid valve to prevent backflow to system.
- Overhead vacuum gauge, compact design and easy to read.
- Integral cylinder structure to guarantee reliability.
Characteristics of Refrigerant 32 (R32) & The Need for Proper HVAC Tools
R-32 is a next generation refrigerant that efficiently carries heat and has lower environmental impact. It can reduce electricity consumption up to approximately 10% compared to that of air conditioners using refrigerant R-22.
Furthermore, compared to the refrigerants widely used today such as R-22 and R-410A, R-32 has a global warming potential (GWP) that is 1/3 lower and is remarkable for its low environmental impact. So all large manufacturers are promoting it as the new refrigerant in the market.
Due to the flammability and high operating pressures of R32, existing equipment (e.g. manifolds, gauges, vacuum pumps, recovery units) must be checked for compatibility. Any potential sources of ignition from electrical equipment must be eliminated.
WIPCOOL F series vacuum pumps are specially designed for this new generation refrigerant R32. The F Series can be used with (A2L or A2) flammable refrigerants and are backward compatible with old refrigerants (such as R12, R22, R134a, R404a, R410a, etc.).
F Series are equipped with built-in solenoid valves and overhead vacuum meters as standard. In addition, the F Series come with reinforced aluminum alloy oil tanks, provide effective heat dissipation and offer better resistance to chemical corrosion.
The oil color and level are easy to see with the oversized sight glass. The powerful and lightweight motor delivers high efficiency with long service life.
Read More About The WIPCOOL F SERIES DUAL STAGE VACUUM PUMPS
Wipcool F series vacuum pump
| Model | 2F2R | 2F3R | 2F4R | 2F5R |
| Voltage | 230V~/50-60Hz or 115V~/60Hz | |||
| Ultimate Vacuum | 15 Microns | |||
| Input Power | 1/2HP | 3/4HP |
1 HP |
1 HP |
| Flow Rate (Max.) | 5CFM, 142L/min | 7CFM, 198 L/min | 9CFM, 255 L/min | 11CFM, 312 L/min |
| Oil Capacity | 450ml | 520ml | 500ml | 480ml |
|
Weight |
6.5kg | 9.8kg | 10kg | 10.2kg |
|
Dimension |
339 x 130 x 225 mm | 410 x 150 x 250 mm | 410 x 150 x 250 mm | 410 x 150 x 250 mm |
|
Inlet Port |
1/4" & 3/8" SAE | 1/4" & 3/8" SAE | 1/4" & 3/8" SAE | 1/4" & 3/8" SAE |
WIPCOOL 2F4R 9CFM DUAL STAGE VACUUM PUMPS
Main Features of F Series:
- Non-sparking design: suitable for use with A2L refrigerants (R32, R1234YF) and other refrigerants
- (R410A, R22, R134a, etc.)
- Brushless motor technology.
- More than 25% lighter than similar products.
- Built-in solenoid valve to prevent backflow to system.
- Overhead vacuum gauge, compact design and easy to read.
- Integral cylinder structure to guarantee reliability.
Characteristics of Refrigerant 32 (R32) & The Need for Proper HVAC Tools
R-32 is a next generation refrigerant that efficiently carries heat and has lower environmental impact. It can reduce electricity consumption up to approximately 10% compared to that of air conditioners using refrigerant R-22.
Furthermore, compared to the refrigerants widely used today such as R-22 and R-410A, R-32 has a global warming potential (GWP) that is 1/3 lower and is remarkable for its low environmental impact. So all large manufacturers are promoting it as the new refrigerant in the market.
Due to the flammability and high operating pressures of R32, existing equipment (e.g. manifolds, gauges, vacuum pumps, recovery units) must be checked for compatibility. Any potential sources of ignition from electrical equipment must be eliminated.
WIPCOOL F series vacuum pumps are specially designed for this new generation refrigerant R32. The F Series can be used with (A2L or A2) flammable refrigerants and are backward compatible with old refrigerants (such as R12, R22, R134a, R404a, R410a, etc.).
F Series are equipped with built-in solenoid valves and overhead vacuum meters as standard. In addition, the F Series come with reinforced aluminum alloy oil tanks, provide effective heat dissipation and offer better resistance to chemical corrosion.
The oil color and level are easy to see with the oversized sight glass. The powerful and lightweight motor delivers high efficiency with long service life.
Read More About The WIPCOOL F SERIES DUAL STAGE VACUUM PUMPS
Wipcool F series vacuum pump
| Model | 2F2R | 2F3R | 2F4R | 2F5R |
| Voltage | 230V~/50-60Hz or 115V~/60Hz | |||
| Ultimate Vacuum | 15 Microns | |||
| Input Power | 1/2HP | 3/4HP |
1 HP |
1 HP |
| Flow Rate (Max.) | 5CFM, 142L/min | 7CFM, 198 L/min | 9CFM, 255 L/min | 11CFM, 312 L/min |
| Oil Capacity | 450ml | 520ml | 500ml | 480ml |
|
Weight |
6.5kg | 9.8kg | 10kg | 10.2kg |
|
Dimension |
339 x 130 x 225 mm | 410 x 150 x 250 mm | 410 x 150 x 250 mm | 410 x 150 x 250 mm |
|
Inlet Port |
1/4" & 3/8" SAE | 1/4" & 3/8" SAE | 1/4" & 3/8" SAE | 1/4" & 3/8" SAE |
WIPCOOL 2F5R 11CFM DUAL STAGE VACUUM PUMPS
Main Features of F Series:
- Non-sparking design: suitable for use with A2L refrigerants (R32, R1234YF) and other refrigerants
- (R410A, R22, R134a, etc.)
- Brushless motor technology.
- More than 25% lighter than similar products.
- Built-in solenoid valve to prevent backflow to system.
- Overhead vacuum gauge, compact design and easy to read.
- Integral cylinder structure to guarantee reliability.
Characteristics of Refrigerant 32 (R32) & The Need for Proper HVAC Tools
R-32 is a next generation refrigerant that efficiently carries heat and has lower environmental impact. It can reduce electricity consumption up to approximately 10% compared to that of air conditioners using refrigerant R-22.
Furthermore, compared to the refrigerants widely used today such as R-22 and R-410A, R-32 has a global warming potential (GWP) that is 1/3 lower and is remarkable for its low environmental impact. So all large manufacturers are promoting it as the new refrigerant in the market.
Due to the flammability and high operating pressures of R32, existing equipment (e.g. manifolds, gauges, vacuum pumps, recovery units) must be checked for compatibility. Any potential sources of ignition from electrical equipment must be eliminated.
WIPCOOL F series vacuum pumps are specially designed for this new generation refrigerant R32. The F Series can be used with (A2L or A2) flammable refrigerants and are backward compatible with old refrigerants (such as R12, R22, R134a, R404a, R410a, etc.).
F Series are equipped with built-in solenoid valves and overhead vacuum meters as standard. In addition, the F Series come with reinforced aluminum alloy oil tanks, provide effective heat dissipation and offer better resistance to chemical corrosion.
The oil color and level are easy to see with the oversized sight glass. The powerful and lightweight motor delivers high efficiency with long service life.
Read More About The WIPCOOL F SERIES DUAL STAGE VACUUM PUMPS
Wipcool F series vacuum pump
| Model | 2F2R | 2F3R | 2F4R | 2F5R |
| Voltage | 230V~/50-60Hz or 115V~/60Hz | |||
| Ultimate Vacuum | 15 Microns | |||
| Input Power | 1/2HP | 3/4HP |
1 HP |
1 HP |
| Flow Rate (Max.) | 5CFM, 142L/min | 7CFM, 198 L/min | 9CFM, 255 L/min | 11CFM, 312 L/min |
| Oil Capacity | 450ml | 520ml | 500ml | 480ml |
|
Weight |
6.5kg | 9.8kg | 10kg | 10.2kg |
|
Dimension |
339 x 130 x 225 mm | 410 x 150 x 250 mm | 410 x 150 x 250 mm | 410 x 150 x 250 mm |
|
Inlet Port |
1/4" & 3/8" SAE | 1/4" & 3/8" SAE | 1/4" & 3/8" SAE | 1/4" & 3/8" SAE |
WIPCOOL ALD-2 Heated Diode Refrigerant Leak Detector
Main Features
- Flexible Probe
- High Precision & Sensitivity Sensor
- LCD Display
| Model | ALD-2 |
| Sensor Type | Heated Diode Gas Sensor |
| Minimum detectable leakage | ≤3 g/year |
| Reaction Time | ≤3 Seconds |
| Warm-up Time | 30 Seconds |
| Reset Time | ≤10 Seconds |
| Operating Temperature Range | 0 - 50ºC |
| Operating Humidity Range | <80%RH (Non-condensing) |
| Applicable refrigerant | CFCs, HCFCs, HFCs, HCs and HFOs |
| Sensor Lifetime | ≥ 1 year |
| Reset | Automatic / Manual |
| Probe Length | 420 mm (16.5 in) |
| Battery | 3 x AA Alkaline Battery, 7 Hours Continuous Working |
WIPCOOL C10 Portable 10 bar Coil Cleaning Machine
Main Features
- Reel structure, free to release and retract the inlet and outlet hose.
- Two pressure optional, meet the different cleaning requirement.
- Built-in pressure controller, suspend automatically.
- Medium pressure, safety for coils cleaning to avoid fins damage.
Product Features
The C10 is a professional air conditioning coil cleaning machine that uses an AC power supply. It can operate in low-pressure mode (3-5 bar) and high-pressure mode (7-10 bar). The pressure can be adjusted by simply pressing the top button, allowing for safe cleaning of indoor and outdoor coils.
Because of the self priming function, so you can use an external water tank to solve water source problem. At the same time, it is equipped with various professional cleaning accessories, such as a 290º rotating nozzle with a 37cm extension wand, which can easily penetrate into narrow gaps for cleaning. The product is lightweight and portable, and can be carried away with one hand.
| Model | C10 |
| Voltage | 230V~/50-60Hz or 100-120V~/50-60Hz |
| Working Pressure | 3-5 / 7-10 bar (Dual) |
| Flow Rate(Max.) | 4L/min |
| Motor Power | 100W |
| Weight | 3.7 Kg |
| Inlet Hose | 2.5m |
| Outlet Hose | 5.0m |
WIPCOOL C10B Battery Operated 10 Bar Cordless Coil Cleaning Machine
Recommended Minimum Battery Size is 4.0Ah, 18 Volts
Want to power your WIPCOOL device directly from a 100-220V mains outlet?
Use the BC-18 battery connector to run on 100-220V mains power if your battery is low, or while it is recharging.
WIPCOOL gives you the freedom of both cordless and electrical power.
Main Features
- Reel structure, free to release and retract the inlet and outlet hose.
- Two pressure optional, meet the different cleaning requirement.
- Built-in pressure controller, suspend automatically.
- Li-ion battery powered, get rid of site power limitations.
Product Features
C10B is a professional cordless air conditioning cleaning machine that can operate in low pressure mode of 3 to 5 bar and high pressure mode of 7 to 10 bar.The pressure section can be adjusted by simply pressing the top button, allowing for safety cleaning of the inner and outer coils.
Because of the self priming function, so you can use an external water tank to solve water source problem. At the same time, it is equipped with various professional cleaning accessories, such as a 290º rotating nozzle with a 37cm extension wand, which can easily penetrate into narrow gaps for cleaning. The product is lightweight and portable, and can be carried away with one hand.
Using an 18V Li-ion battery for power supply means there is no need to search for AC power sources everywhere, especially when cleaning outdoor air conditioning units. In addition, In order to maximize the utilization of existing Li-ion batteries in users’ hands and reduce their purchasing costs, we have specially developed 6 mainstream brand battery adapters (Makita and Dewalt) which can easily be compatible with the use of the above brand batteries.
| Model | C10B |
| Voltage | 18V(AEG/RIDGID Interface) |
| Working Pressure | 3-5 / 7-10 bar (Dual) |
| Flow Rate(Max.) | 4L/min |
| Motor Power | 80W |
| Weight | 3.7 Kg (w/o battery) |
| Inlet Hose | 2.5m |
| Outlet Hose | 5.0m |
| Reference Running Time | 50-120mins (4.0Ah Li-ion battery) |
| Reference Charging Time | 210 mins (4.0Ah Li-ion battery) |
WIPCOOL C28T 28 Bar Crankshaft Driven High Pressure Cleaning Machine / Washer
- Industrial grade reliable and durable
- Variable pressure (5-28bar) for optimal flexibility to meet the different occasions
- Crankshaft-driven pump with ceramic coated pistons for long service life.
- Large oil level sight glass, easily accessible to check oil status, and ready for oil change in time for maintenance.
The C28T is a professional high-pressure equipment specifically designed for the HVAC cleaning industry. It features a crankshaft-driven pump with ceramic-coated pistons for long service life, enabling continuous operation.
With its adjustable working pressure ranging from 5 to 28 bar, it offers optimal flexibility for cleaning, effectively removing even the toughest dirt from condenser and evaporator coils without damaging the sensitive fins.
Its small size and light weight provide great portability, making it easy to carry in one hand.
| Model | C28T |
| Voltage | 230V~/50-60Hz or 100-120V/50-60Hz |
| Working Pressure | 5-28bar(adjustable) |
| Flow Rate (Max.) | 4.5L/min |
| Output Power | 3/4HP |
| Weight | 8.5kg |
| Water Pipe | 2m inlet hose, 7m outlet hose |
WIPCOOL C110T 110 Bar Crankshaft Driven Super High Pressure Washer with Dolly
Voltage : 230V~/50-60Hz or 115V~/60Hz
Main Features
- Compact, durable, and powerful.
- Variable pressure range (10-90 bar) offers optimal flexibility to suit various applications.
- Crankshaft-driven brass pump with ceramic-coated pistons ensures extended service life.
- Large oil level sight glass allows for easy monitoring of oil status, ensuring timely oil changes for maintenance.
- Dolly is available separately. ModelNo: Dolly110
The C110T is a professional high-pressure, heavy-duty machine, compact on the outside yet powerful on the inside. It features a crankshaft-driven brass pump, enabling continuous operation.
It is the ideal all-around solution for an industrial pressure washer, perfect for cleaning industrial environments and meeting facility management and maintenance needs.
With its compact size, this equipment is highly portable, allowing for easy one-handed carrying or convenient mounting on a trolley.
| Model | C110T |
| Voltage | 230V~/50-60Hz or 115V~/60Hz |
| Max. Pressure | 110 bar |
| Operation Pressure | 90 bar |
| Input Power | 3 HP |
| Inlet water pressure | 3 bar |
| Flow Rate | 9L/min |
| Weight | 26.0 kgs |
WIPCOOL CT370 Chiller Tube Cleaner
Main Features
- Compact design, portable & durable
- Self priming function: Pumps water from buckets or storage tanks
- Integrated storage: A full set of brushes can be stored in the main body.
- Reliable & Durable:Forced air cooling ensures stable operation over extended periods.
- Excellent Mobility: Equipped with wheels and a push handle for easy transport.
- Patented Tech: The quick-connect structure allows for fast and easy brush changes.
The CT370 is a professional tool designed for chiller tube cleaning, featuring a rugged and dependable design. It is specifically tailored for HVAC maintenance technicians and contractors.
This compact tube cleaner kit includes everything you need for efficient tube cleaning, along with all the innovative features you expect. It features integrated flushing, a self-priming function, 860 RPM shaft rotation, a quick-connect shaft and brushes, all while being half the size of our traditional tube cleaners.
The wheels and telescopic handle facilitate easy transportation between locations. An integrated storage compartment keeps all your accessories organized and readily accessible between uses, providing the ultimate experience in portability.
| Model | CT370 |
| Voltage | 100-120V~/50-60Hz 230V~/50-60Hz |
| Output Power | 1/2 HP |
| Shaft Speed | 1000 r/min 860r/min |
| Shaft Length | 7.6 HP |
| Cord Length | 4m |
| Shaft Size | 12mm (7.6m) |
| Brushes | 18pcs (2 boxes) |
| Weight | 24kg |
WIPCOOL C2BW Hand-held Electric Sprayer
Main Features
- Resistant to strong acids & alkaline
- HD LCD battery indicator clearly displays the remaining power.
- The visual level display clearly shows the remaining cleaner.
- The high-speed micro-motor ensures optimal working pressure.
- The universal USB charging port allows charging anytime, anywhere.
The C2BW handheld electric sprayer is made from high-density polyethylene, with all materials resistant to strong acids and alkalis. It features a built-in 3.7V/2200mAh Li-ion battery, making it an ideal replacement for traditional handheld manual sprayers.
The adjustable spray nozzle provides a full range of spray patterns, allowing the C2BW handheld electric sprayer to be used for applying most coil cleaning solutions on air conditioning cooling coils, air-cooled condensers, finned heating coils, refrigeration case or cooler coils, permanent air filters, and other greasy, dirty surfaces.
| Model | C2BW |
| Voltage | 3.7V (2200mAh) |
| Optimum spray Distance | 0.5 to 3m |
| Tank Capacity | 2L |
| Nozzle Spray Sizes | 0.3L/min(mist), 0.5L/min(water column) |
| Reference Running Time | 2 hours |
| Reference Charging Time | 2-3 hours |